Specification Sheet

The



brighter



choice

Braeburn Round

Zone Dampers

Power Open,

Power Close

Braeburn PO/PC Round Zone Dampers are used

to control the volume of air that will be distributed to

a zoned area. With three wire installation and a high

torque motor, Braeburn zone dampers provide the

quality and durability you have come to expect from

the value leader in indoor controls.

Quick and Easy Installation

Braeburn power open, power close dampers are

designed and built to ensure easy installation and

years of trouble free use. Each damper is formed

from heavy duty steel. Three wire installation with

dual LED indicators help round out the features of

this high quality damper.

Product Features and Beneﬁts

• Power Open, Power Close Operation

• Heavy Duty Galvanized Construction with Precision

Rolled Stiffening Ribs

• Dual LEDs for Positive Indication of Open to Close

• Excellent for Use as a Bypass Damper with a Static

Pressure Controller (Braeburn 149020)

Speciﬁcations

Dimensions See dimensional drawing on reverse

Power 24 VAC, 4 VA

Actuator High torque

Indicators Dual LEDs Indicate Open and Closed

Terminals Three Quick Connect Wiring Terminals

Function Use as Zone Damper or Bypass Damper

Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com

PAGE 1
Power Open, Power Close Braeburn Round Zone Dampers Braeburn PO/PC Round Zone Dampers are used to control the volume of air that will be distributed to a zoned area. With three wire installation and a high torque motor, Braeburn zone dampers provide the quality and durability you have come to expect from the value leader in indoor controls. Quick and Easy Installation Braeburn power open, power close dampers are designed and built to ensure easy installation and years of trouble free use.
PAGE 2
Braeburn Round Zone Dampers Power Open, Power Close Architectural Specifications The Round Power Open / Power Close Damper shall be Braeburn Series 1090XX where XX indicates damper diameter (05, 06, 07, 08, 09, 10, 12, 14, 16, 18 and 20 inches). The damper shall be powered directly from zone panel 24 VAC damper terminals. A shared common terminal along with power open and power closed terminals shall be provided for damper control. In the event of a power failure, no readjustment shall be required.