Specification Sheet

The



brighter



choice

Braeburn Round

Zone Dampers

Static Pressure

Bypass Dampers

Braeburn Round Bypass Dampers are used

to maintain proper static pressure at the system

plenum. When air ﬂow conditions permit, the

static damper is an economical alternative

to an electrically controlled bypass damper.

System pressure is controlled without the use

of sensors or wiring by using a ﬁeld adjusted

sliding weight. Precision cut, heavy gauge steel

is galvanized to help ensure long life.

Quick and Easy Installation

Braeburn round bypass dampers are de

signed

for quick and easy installation. From the fully

crimped outlet end to the computer designed

stiffening ribs, this product reﬂects the quality

and durability you have come to expect from

Braeburn. For added ease of in

stallation, this

damper requires no wiring.

Product Features and Beneﬁts

• Can be Mounted Vertically or Horizontally

• Fully Adjustable Control Allows for Damper to

be Installed in Many Mounting Positions

• Long Life Precision Bushings

• Stiffening Ribs Add to Damper Rigidity

• No Wiring or Sensors Required

• High Visibility Damper Position Indicator

Speciﬁcations

Dimensions See Chart on Reverse

Power None Required

Sensor Weighted Arm

Indicators Air Flow Direction

Construction Heavy Gauge Galvanized Steel

Mount Vertical or Horizontal

Air Flow Left or Right

Toll-Free 866.268.5599 (U.S.) +1.630.844.1968 (Outside the U.S.) www.braeburnonline.com

PAGE 1
Static Pressure Bypass Dampers Braeburn Round Zone Dampers Braeburn Round Bypass Dampers are used to maintain proper static pressure at the system plenum. When air flow conditions permit, the static damper is an economical alternative to an electrically controlled bypass damper. System pressure is controlled without the use of sensors or wiring by using a field adjusted sliding weight. Precision cut, heavy gauge steel is galvanized to help ensure long life.
PAGE 2
Braeburn Round Zone Dampers Static Pressure Bypass Dampers Architectural Specifications The Static Pressure Damper shall be Braeburn Series 1191XX where XX indicates damper diameter (07, 08, 10, 12, 14, 16, 18 or 20 inches). The damper shall require no electrical power and shall control bypass air volume by means of a field adjustable damper weight. In the event of a power failure, no readjustment shall be required.