User's Manual Part 1

BL-521 r7 QSG.doc © Copyright Brainboxes Limited 2003 Page 4 of 4
If you are running HyperTerminal for the first time you will be prompted for information about your location. This
section must be filled in, but will not affect the connection.
In the next screen give a name to your connection (e.g. BL-521 Configuration), then click OK and select the Port
that the BL-521 is plugged into. All other fields will then be greyed out.
Click OK
Select the communications parameters that your device is configured to. In this example we have used the
factory defaults. If you have previously changed these values, make sure the settings here match those
configured on the device.
Click OK