Datasheet

Connect, Congure, Control
ED-588 ETHERNET TO Digital IO 8 Inputs + 8 Outputs
Ethernet to Digital In/Out
ED-588
• 8 Digital Inputs and 8 Digital Outputs
• Drives high current and high voltage loads
• Ideal for inductive, capacitive & resistive loads
• Factory oor process control and automation
• Network enable your NuDAM/ADAM modules
• -30
o
C to +80
o
C Temperature range
• +5V to +30V DC Input Power
ED-588
Digital Channels
Inputs Input Channels 8 non-isolated input channels
NPN/PNP One jumper congures all inputs as either pull up for NPN, active low,
type sensors or pull down for PNP, active high, type sensors
Logic Level 0: 0V to +1V
Logic Level 1: +3.5V to +30V
Latched Inputs: Triggered by user programmable positive or negative edges, stays true
until acknowledged
Counter Inputs: User programmable- counts positive or negative transitions 0-65335
Outputs Output Channels 8 non-isolated output channels
Maximum output current Sinks up to 1 Amp per pin, 40V max load
Max combined load 4.0 Amps per ED device
Characteristic: Open drain output, protected MosFET intelligent short circuit protec-
tion up to 36V
Over temperature shutdown :175
0
C typical 150
0
C min
Maximum output load Voltage 40V
ESD Protection 16kV