Product manual

Serial Solutions Range Product

Manual

6.4. Baud rate test application

To test to see if a specific baud rate is supported by one of our cards, the Baud rate test application can be

used. You simply put the Baud rate details into the program and then click calculate and the details will be

output. This software is supplied on the Serial Solutions CD.

The following settings need to be applied for specific Brainboxes products

• If you have a PM-121 or CC-530/525 you will need to select the 950 UART type.

• If you have any UC card set the UART type to Versatile UART CID = 0x10

• If you have any other PM card set the UART type to Versatile UART CID = 0x01

• The last option is for USB devices so is not applicable for the Serial Solutions software product

ranges.

The crystal frequency will also need to be set to a specific value for the card that you are using. For UC and

PM cards the frequency is 1475600.