User manual

GB
Page GB-11
indicates of heating circuit pump and boiler pump
– boiler status (Off, On)
indicates with room sensor activated
– room thermostat function (heating Off, On)
– current room temperature
indicates in dependence on type of sensor in hot
water tank
– Domestic hot water tank temperature (with tank
sensor)
– switching condition (with tank thermostat)
2211..00
RROOOOMM TTEEMMPP HHCC
Room temperature
Unmixed heating circuit
(room sensor activated)
5522..00
DDHHWW
OOFFFF
DDHHWW
TTHHEERRMMOOSSTTAATT
°C
Domestic hot water tank
temperature
only with domestic hot water
tanksensor
switching condition tank con-
trol only with tank thermostat
RROOOOMM TTEEMMPP HHCC
Room temperature
Unmixed heating circuit
(room sensor deactivated)
or
°C
or
Info-time
The standard display will appear after a set time if no key is pressed. It is possi-
ble to have the information shown permanently with a fastkey procedure or to
adjust the display time (except for the general exit time SYSTEM - Parameter 11):
- press the i-key for 3 seconds
- INFO TIME (= duration of the information in the display) will appear
- Turn the rotary pushbutton to the desired value.
- Press the rotary pushbutton.
- The selected value is activated.
Setting range: OFF (permanent display of selected information)
0.5 to 10 minutes
Application: Permanent display of selected information (monitoring)
----
* Outside temperature is only displayed when the outside sensor is connected.
8A520900_GB.qxp 11.11.2004 14:41 Seite 11