Owner's Manual

12
WWW.VINOTEMP.COM
!
!
9. Sensor Cook
(1) In waiting state, press "Dinner Plate", "Fresh Vegetable" or "Frozen Vegetable". The
screen will display "SC".
(2) Press “START/Enter/Add 30 sec.” to start sensor cooking. "SC" will flash in the display.
(3) The sensor will sound once when the steaming is emanated. The surplus time will
display.
10. MEMORY FUNCTION
(1) Press "Favorite" to choose memory 1-3 procedure. The screen will display 1,2,3.
(2) If the procedure has been set, press “START/Enter/Add 30 sec.” to use it. If not, you
can continue to set the procedure. Only one or two stages can be set.
(3) If the procedure has not been set after finishing the setting, press " Favorite" once to
save the procedure and turn back to the waiting states. If you press “START/Enter/Add
30 sec.” button, it will start cooking at once and save the procedure too.
Example: Demonstrate how to set the following procedure as the second memory, which is
memory 2. Cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "Favorite" twice. Stop pressing until the screen displays "2".
b. Press "COOK TIME" once, and then press "3","2","0" in order.
c. Press “POWER LEVEL” once, and "PL10" displays on the screen. You can then
press "8", and "PL8" displays.
d. Press "Favorite" to save the setting. Buzzer sounds once and then turn back to
waiting states. If you press “START/Enter/Add 30 sec.” again, the procedure will be
saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure needs to reset.
f. When you want to run the saved procedure, in waiting states, press "Favorite"
twice. As the screen displays “2”, you can then press “START/Enter/Add 30 sec.”
to start cooking.
NOTE: Defrosting and Auto menu cannot be set in memory function.
11. MULTI-STAGE COOKING
At most, 2 stages can be set for cooking. In multi-stage cooking, if one stage is defrosting, then
defrosting shall be placed at the first stage automatically.
Note: Auto menu cannot work in the multi-stage cooking.
Example: If you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes, the cooking steps are as follow:
(1) Press "COOK TIME " once, and then press "5","0","0" to set the cooking time.
(2) Press “POWER LEVEL” once, and then press "8" to select 80% microwave power.
(3) Press "COOK TIME " once, and then press "1","0","0","0" to set the cooking time.
(4) Press “POWER LEVEL” once, and then press "6" to select 60% microwave power.
(5) Press “START/Enter/Add 30 sec.” to start cooking.
12. INQUIRING FUNCTION
(1) In the microwave cooking state, press “POWER LEVEL” to inquire microwave power
level. The current microwave power will be displayed. After three seconds, the oven will
turn back to the previous state.
(2) In cooking state, press “CLOCK”. The oven will display clock for three seconds.