Owner's Manual

9
732 South Racetrack Road, Henderson, Nevada 89015
info@vinotemp.com
COUNTERTOP INSTALLATION
Remove all packaging material and accessories. Examine the oven for any damage such as
dents or broken door. Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet surface. Do not
remove the light brown Mica cover that is attached to the oven cavity to protect the magnetron.
INSTALLATION
1. Select a level surface that provides
enough open space for the intake
and/or outlet vents.
A minimum clearance of 3 inches
(7.5cm) is required between the oven
and any adjacent walls. One side must
be open.
1) Leave a minimum clearance of 12
inches (30cm) above the oven.
2) Do not remove the legs from the
bottom of the oven.
3) Blocking the intake and/or outlet
openings can damage the oven.
4) Place the oven as far away as possible. Operation of microwave oven may cause
interference to your radio or TV reception.
2. Plug your oven into a standard household outlet. Be sure the voltage and the frequency are
the same as the voltage and the frequency on the rating label.
WARNING: Do not install oven over a range cooktop or other heat-producing appliance. If installed near
or over a heat source, the oven could be damaged and the warranty would be void.