Structured Cabling Systems
Structured Cabling Systems C o p p e r S y s t e m s Page 5 Augmented Category 6 Systems Page 7 Category 7 Systems Page 19 Category 6 Systems Page 21 Category 5e Systems Page 39 Category 3 Systems Page 57 Copper System Accessories Page 61 O p t i c a l S y s t e m s Page 73 Tight Buffered Cables Distribution Cable Page 82 Breakout and Patch Cable Page 84 Loose Tube Cables Unitube Cable Page 88 Multi Loose Tube Cable Page 92 Special Environment Cables Fire Survival Cabl
Our Business Brand-Rex is a leading global supplier of structured cabling systems for data networks, and is a niche supplier of high performance cables for extreme environment applications. Brand-Rex provides complete cabling systems that connect the IT equipment in our offices and datacentres – from patch cords and wall outlets seen in the office, to cable running under floors and above ceilings, to connectivity panels that interface with active equipment in the IT room.
c o m pa n y p r o f i l e Brand-Rex’s technical expertise is further evidenced through representation on standards committees, products that stand up to 3rd party scrutiny, a significant patents portfolio, industry-recognised training courses and professional engagement with the industry’s leading consultants. Technical Service and Support Brand-Rex has a dedicated and experienced technical support team that is led from head office and located throughout the world to support our global customers.
copper SyStemS Structured cabling systems of today and in the future structured cabling world have to cope with the ever-growing demands of greater and greater bandwidth absorption within the local area network. all brand-rex copper systems provide the it manager with a complete open cabling system from the pbX point of entry, to building distribution, to floor distribution, to wiring closet, to wall outlets, and ultimately to the desk.
produc t deScriptorS eXplained Cable Properties a simple legend system has been adopted throughout this brochure. the detail listed here provides descriptions of the symbols used. these symbols describe the physical properties of the cable, and where cables are to be used.
A u g m e n t e d C at e g o r y 6 S y s t e m s Waking up to a new era 10 Gigabit Ethernet over copper cabling systems have been heralded as the greatest technological revolution in networking since the birth of Ethernet. The engineering science dedicated to overcoming the boundaries of convention should not be underestimated. Brand-Rex has dedicated a team of design engineers, technologists and laboratory technicians to developing the highest performance 10 Gigabit Ethernet solution on the market today.
a u g m e n t e d c at e g o r y 6 S y S t e m S PRODUCT DESCRIPTION The Brand-Rex 10GPlus product set is a premium quality, high performance, future proof, cabling system. 10GPlus is classified as an Augmented Category 6 and Class EA product set which is fully backward compatible to Category 6 (Class E) and Category 5e (Class D) solutions. It is a product set which is designed to be compliant with the new IEC Class EA and TIA 568B.2-10 standards, ready for the new application from IEEE, 10GBASE-T.
A u g m e n t e d C at e g o r y 6 S y s t e m s AC6 500MHz Sheath Cross Filler Designed to be compliant with the following draft standards: • I SO 11801:2002 Amm1.1, ISO 61156-5 ed 2, EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.2-10 23 AWG PACW Polyolefin Insulation Cable Standards The cable is backwards compatible with: • I SO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 50288-6-1, ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.
A u g m e n t e d C at e g o r y 6 S y s t e m s AC6 500MHz Sheath AI/PET Tape AI/PET Tape Polyolefin Insulation Cable Standards The cable is compliant with: • ISO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 50288-5-1 ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.2-1 It is also designed to be compliant with the following draft standards when they are published: • ISO 11801:2002 Amm1.1, ISO 61156-5 ed 2 , EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.
a u g m e n t e d c at e g o r y 6 S y S t e m S AC6 500MHz Sheath tacW braid AI/PET Tape cellular polyolefin insulation Cable Standards The cable is compliant with: • ISO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 50288-5-1 ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.2-1 It is also designed to be compliant with the following draft standards when they are published: • ISO 11801:2002 Amm1.1, ISO 61156-5 ed 2 , EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.
a u g m e n t e d c at e g o r y 6 S y S t e m S AC6 500MHz Sheath polyester tape AI/PET Tape polyolefin insulation Cable Standards The cable is compliant with: ISO11801:2002, ISO61156-6, EN 50173-1:2002, EN 50288-5-2 ANSI/TIA/EIA568B, ANSI/TIA/EIA568B.21, ANSI/TIA/EIA568B.
a u g m e n t e d c at e g o r y 6 S y S t e m S AC6 500MHz PRODUCT DESCRIPTION: The Brand-Rex Augmented Category 6 patch cord is part of the Brand-Rex 10GPlus cabling system. The 10GPlus cabling system is comprised of high performance cables and connectivity which not only provide a reliable platform for all of today’s network applications, but is also designed to future-proof networks for the emerging, new higher speed protocols of tomorrow, such as 10GBASE-T.
a u g m e n t e d c at e g o r y 6 S y S t e m S 5e 100MHz Brand-Rex Patch Cords - 10GPlus Product Part Numbering Part Number 27 aWg lSoH patchcord 1m (1.0m) ac6pcg010-x88Hb 27 aWg lSoH patchcord 2m (2.1m) ac6pcg020-x88Hb 27 aWg lSoH patchcord 3m (3.0m) ac6pcg030-x88Hb 27 aWg lSoH patchcord 5m (5.0m) ac6pcg050-x88Hb AC6 500MHz PRODUCT DESCRIPTION: the brand-rex augmented category 6 patchcord is part of the new brand-rex 10gplus cabling system.
a u g m e n t e d c at e g o r y 6 S y S t e m S AC6 500MHz Brand-Rex Copper Connectivity - 10GPlus PRODUCT DESCRIPTION The Brand-Rex Augmented Category 6 Snap-In-Jack panel is part of the Brand-Rex 10GPlus cabling system.
a u g m e n t e d c at e g o r y 6 S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - 10GPlus Jacks augmented category 6 Snap-in-Jacks 6 250MHz AC6 500MHz PRODUCT DESCRIPTION: the brand-rex 10gplus Snap-in-Jack offers true class ea component performance using a patented contact array design. The 10GPlus system is classified as an Augmented Category 6 and Class EA product set that is fully backwards compatible to Category 6 (Class E) and Category 5e (Class D) products.
a u g m e n t e d c at e g o r y 6 S y S t e m S 5e 100MHz Product Part Numbering Product Part Number ac6JaKS000cr Compatible System Products Description 24 port in-line Snap-in-Jack panel 24 port Staggered Snap-in-Jack panel 24 port angled Snap-in-Jack panel 24 port coloured insert Snap-in-Jack panel - black 24 port coloured insert Snap-in-Jack panel - grey AC6 500MHz PRODUCT DESCRIPTION: the 10gplus Snap-in-Jack offers 500mHz component performance and quick tool-free wire termination with push down wi
a u g m e n t e d c at e g o r y 6 S y S t e m S 5e 100MHz 6 250MHz AC6 500MHz PRODUCT DESCRIPTION: Brand-Rex Copper Connectivity - 10GPlus Jacks augmented category 6 tool-free Jack When used within a channel the tool-free jack provides an industry leading electrical performance and is fully compatible with brand-rex uK and continental uni style faceplates and products. the jacks come supplied in boxes of 12; termination instructions are on the rear of the box. no termination tool is required.
C at e g o r y 7 S y s t e m s BRAND-REX CATEGORY 7 CABLING (CATEGORY 7 - CLASS F): Key Features • U-MediaPlus is a range of universal media cables that exceed the Category 7 requirements of ISO/IEC 11801 : 2002 and EN 50173-1 : 2002 • Multi Gigabit capability • Individual and overall shielding providing outstanding EMI/RFI protection • Backward compatibility guaranteed • Third party independent certificates of compliance (from 3P) are available • Provides a foundation for supporting high bandwidth
c at e g o r y 7 S y S t e m S 7 600MHz Sheath tacW braid AI/PET Tape 23 aWg pacW cellular polyolefin insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-4-1 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: U-MediaPlus S/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class F/Cat 7 cables to support gigabit ethernet protocol for installation in horizontal and backbone areas.
C at e g o r y 6 S y s t e m s BRAND-REX CAT6PLUS SYSTEM (CATEGORY 6 - CLASS E): Key Features • Cat6Plus is standards compliant • Cat6Plus is third party independently verified by 3P and GHMT • Third party independent certificates of compliance are available for component and channel performance from 3P Inc.
c at e g o r y 6 S y S t e m S The Cat6Plus System the systems support all protocols defined in current editions, and amendments, of ISO 11801:2002, ANSI/TIA/EIA 568b.2.1 : 2002 and en50173-1:2002 (including ieee802.3ab gigabit ethernet) and are fully backward compatible. Structured wiring systems comprising of cat6plus cables, patch leads and connectivity are designed to be compliant with the current sets of Class E / Category 6 published and draft standards requirements as an absolute minimum.
C at e g o r y 6 S y s t e m s 6 250MHz Sheath Cross Filler Solid PE Insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-6-1 ANSI/TIA/EIA 568B.2.1 : 2002 23 AWG PACW Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus U/UTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
c at e g o r y 6 S y S t e m S 6 250MHz Sheath polyester tape AI/PET Tape polyolefin insulation 23 aWg pacW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 tacW drainwire PRODUCT DESCRIPTION: Cat6Plus U/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit ethernet protocol for installation in horizontal and backbone areas.
C at e g o r y 6 S y s t e m s 6 250MHz Sheath AI/PET Tape AI/PET Tape Cellular Polyolefin Insulation 23 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 TACW Drainwire Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus F/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
c at e g o r y 6 S y S t e m S 6 250MHz Sheath tacW braid AI/PET Tape cellular polyolefin insulation 23 aWg pacW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus S/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit ethernet protocol for installation in horizontal and backbone areas.
c at e g o r y 6 S y S t e m S 6 250MHz THE BRAND-REX 8 POINT PATCH CORD PROMISE 1. cat6plus patch cords employ independently verified Category 6 cable 2. cat6plus patch cords are manufactured using leading brand Category 6 conformant RJ-45 modular plugs 3. cat6plus patch cords are manufactured with a flexible strain relief boot as standard 4. cat6plus patch cords are manufactured using only quality approved assembly houses to the exacting requirements of Brand-Rex purchase specification 5.
C at e g o r y 6 S y s t e m s 6 250MHz The Brand-Rex 8 Point Patch Cord Promise 1. Cat6Plus patch cords employ independently verified Category 6 cable 2. Cat6Plus patch cords are manufactured using leading brand Category 6 conformant RJ-45 modular plugs 3. Cat6Plus patch cords are manufactured with a flexible strain relief boot as standard 4. Cat6Plus patch cords are manufactured using only quality approved assembly houses to the exacting requirements of Brand-Rex purchase specification 5.
C at e g o r y 6 S y s t e m s 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Panels Category 6 Panel with cable management 44.1 483 132 44.
C at e g o r y 6 S y s t e m s 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Jacks Category 6 Snap-In-Jacks Product Part Numbering Unshielded Shielded LSA Style - Black C6CJAKU0K2 C6CJAKF0K2 LSA Style - White C6CJAKU0K3 - 110 Style - Black C6CJAKU012 - 110 Style - White C6CJAKU013 - Other colours available on request. 30 PRODUCT DESCRIPTION: The Brand-Rex Cat6Plus Snap-In-Jack offers true Category 6 component performance using a new patented contact array design.
c at e g o r y 6 S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - Cat6Plus Jacks category 6 Keystone Jack Product Part Numbering Description category 6 Shielded Jack Product Part Number c6cJaKS000cr Compatible System Products: Description 24 port in-line Snap-in-Jack panel 24 port Staggered Snap-in-Jack panel 24 port angled Snap-in-Jack panel 24 port coloured insert Snap-in-Jack panel - black 24 port coloured insert Snap-in-Jack panel - grey Product Part Number mmcpnlX24SiJ2mil mmcpnlX24SiJ2 mmc
c at e g o r y 6 S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - Cat6Plus Jacks category 6 tool-free Jack 6 250MHz PRODUCT DESCRIPTION: the tool-free Jack offers true cat6 performance and is fully compatible with brand-rex uK and continental uni style faceplates and products. the jacks come supplied in boxes of 12; termination instructions are on the rear of the box. no termination tool is required. each jack has integral colour code wiring labels.
C at e g o r y 6 S y s t e m s 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Outlets Category 6 Triple Shuttered Outlet PRODUCT DESCRIPTION: The Brand-Rex Cat6Plus Unshielded Triple Outlet offers a high density outlet solution with true Category 6 component performance. The outlet is backward compatible with our UK and continental UNI style faceplates providing a 3 or 6 RJ-45 solution for high density outlet installations.
c at e g o r y 6 S y S t e m S 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Outlets category 6 european Style outlet 69.
C at e g o r y 6 S y s t e m s 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Tower Units PRODUCT DESCRIPTION: The tower mount frame provides a modular, high density, cross-connect and cable management system. The base tower is supplied as a 288 pair unit but the capacity can be increased using additional extension frames. Tower units are supplied with wiring bases and connector blocks for 288 pair.
c at e g o r y 6 S y S t e m S 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect category 6 cross-connect patchcord PRODUCT DESCRIPTION: Cross-connect patchcords are available in 110 to 110 style or 110 to RJ45 style. The standard Category 6 110 connector is supplied in a 4 pair version only. PRODUCT CHARACTERISTICS: conformance: category 6 ANSI/TIA/EIA 568B.2.1 cord type: grey 24aWg utp 110 – 110 dimensions: 50.2 x 30.9 x 9.
C at e g o r y 6 S y s t e m s Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Insertion Tool PRODUCT DESCRIPtion: To ensure correct termination of Brand-Rex’s Category 6 Cross Connect solution it is advised to use a specially designed Insertion tool. The insertion tool is used to simultaneously terminate the 4 pairs onto Category 6 Cross Connect wiring bases and underneath the Category 6 connector block. A Replacement Head is also available when the tool becomes worn.
c at e g o r y 6 S y S t e m S 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect category 6 cross-connect Wiring bases and connector blocks PRODUCT DESCRIPTION: Wiring Base the category 6 110 wiring base can be supplied as a 48, 96 or 288 pair version, with or without legs. it can also be supplied rack mounted as a 96, 192 or 288 pair version. designation labels are included with the bases.
C at e g o r y 5 e S y s t e m s BRAND-REX GIGAPLUS SYSTEM (CATEGORY 5E - CLASS D): Key Features • GigaPlus is a fully standards compliant open system • GigaPlus provides a secure, cost-effective and flexible Cat5e cabling system solution for running today’s LAN protocols and high speed applications such as 1000Base-T • GigaPlus exceeds the requirements of ISO/IEC 11801 : 2002 and EN 50173-1 : 2002 for Class D channels and ANSI/TIA/EIA 568B.
c at e g o r y 5 e S y S t e m S The GigaPlus System Structured wiring systems comprising of gigaplus cables, patch cords and connectivity are designed to be compliant with the current sets of Class D / Category 5e published standards requirements as an absolute minimum. the systems support all protocols defined in current editions, and amendments, of ISO 11801 : 2002, ANSI TIA/EIA 568B.2 : 2002 and en50173-1-1 : 2002 (including gigabit ethernet) and are fully backward compatible.
c at e g o r y 5 e S y S t e m S 5e 100MHz Sheath 24 aWg pacW polyolefin insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-3-1 ANSI/TIA/EIA 568B.2 : 2002 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus U/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit ethernet protocol for installation in horizontal and backbone areas.
c at e g o r y 5 e S y S t e m S 5e 100MHz Sheath AI/PET Tape 24 aWg pacW polyolefin insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-2-1 ANSI/TIA/EIA 568B.2 : 2002 tacW drainwire Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus F/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit Ethernet protocol combined with good EMI/RFI protection for installations in horizontal and backbone areas.
C at e g o r y 5 e S y s t e m s 5e 100MHz Sheath TACW Braid AI/PET Tape 24 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-2-1 ANSI/TIA/EIA 568B.2 : 2002 Polyolefin Insulation Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus SF/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit Ethernet protocol combined with exceptional EMI/RFI protection for installations in horizontal and backbone areas.
c at e g o r y 5 e S y S t e m S 5e 100MHz THE BRAND-REX 7 POINT PATCH CORD PROMISE 1. GigaPlus patch cords are independently verified by 3P 2. GigaPlus patch cords are manufactured using leading brand Category 5e conformant RJ-45 modular plugs 3. GigaPlus patch cords are manufactured with a flexible strain relief boot as standard. 4. GigaPlus patch cords are tested in accordance with our AQL plan for Category 5e standards conformance 5.
C at e g o r y 5 e S y s t e m s 5e 100MHz The Brand-Rex 7 Point Patch Cord Promise 1. GigaPlus patch cords are independently verified by 3P 2. GigaPlus patch cords are manufactured using leading brand Category 5e conformant RJ-45 modular plugs 3. GigaPlus patch cords are manufactured with a flexible strain relief boot as standard 4. GigaPlus patch cords are tested in accordance with our AQL plan for Category 5e standards conformance 5.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Panels PRODUCT DESCRIPTION: The GigaPlus 19" rack mounted patch panel offers true Category 5e component performance using patented state of the art printed circuit technology. All outlets are numerically identified with an additional writable surface for ease of port naming. Each panel is supplied with cable ties, panel mounting accessories and short form installation instructions.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Panels Category 5e Panel - with Cable Management 44.1 483 PRODUCT DESCRIPTION: The GigaPlus 19" rack mounted patch panel offers true Category 5 component performance using patented state of the art printed circuit technology. Available in 16 and 24 port versions, these panels have a cable management / strain relief feature built into the rear mounted grounding bar.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Jacks Category 5e Snap-In Lead Frame Jacks - Shielded and Unshielded PRODUCT DESCRIPTION: GigaPlus Shielded and Unshielded Snap-In-Jacks offer true Category 5e component performance. The jack is backward compatible and also fully compatible with all our UK and Continental style faceplates and products. Each jack is supplied with a short form installation instruction and stuffer cap.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Jacks Category 5e Snap-In-Jacks - Shielded and Unshielded PRODUCT DESCRIPTION: GigaPlus Shielded and Unshielded Snap-In-Jacks offer true Category 5e component performance. The jacks are backward compatible and also fully compatible with all our UK and Continental style faceplates and products. Each jack is supplied with a short form installation instruction and cable tie.
c at e g o r y 5 e S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Jacks category 5e tool-free Jack PRODUCT DESCRIPTION: the tool-free Jack offers true cat5e performance and is fully compatible with brand-rex uK and continental uni style faceplates and products. the jacks come supplied in boxes of 12; termination instructions are on the rear of the box. no termination tool is required. each jack has integral colour code wiring labels.
c at e g o r y 5 e S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Modules category 5e Slimline Shuttered modules - Shielded and unshielded 25 50 25 18.6 38.6 7.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Outlets Category 5e Triple Shuttered Outlet PRODUCT DESCRIPTION: The Brand-Rex GigaPlus Unshielded Triple Outlet offers a high density outlet solution with true Category 5e component performance. The outlet is backward compatible with our UK and continental UNI style faceplates providing a 3 or 6 RJ-45 solution for high density outlet installations.
c at e g o r y 5 e S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Outlets category 5e european Style outlet 69.
C at e g o r y 5 e S y s t e m s 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Tower Units PRODUCT DESCRIPTION: The tower mount frame provides a modular, high density, cross connect and cable management system. The base tower is supplied as a 300 pair unit but the capacity can be increased using additional extension frames. Tower units are supplied with wiring bases and connector blocks for 300 pair.
c at e g o r y 5 e S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect category 5e cross connect patch cord PRODUCT DESCRIPTION: cross connect patchcords are available in 110 to 110 style or 110 to rJ45 style. the standard category 5e 110 connector can be supplied as a 4 pair or 1 pair version. PRODUCT CHARACTERISTICS: conformance: category 5e ANSI/EIA/TIA 568B.2 cord type: grey 24aWg utp dimensions: 50.2 x 30.9 x 9.0mm (4 pair) 57.5 x 7.4 x 9.
c at e g o r y 5 e S y S t e m S 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect category 5e cross connect Wiring bases and connector PRODUCT DESCRIPTION: Wiring Base the category 5e 110-wiring base can be supplied as a 50, 100 or 300 pair version, with or without legs. it can also be supplied rack mounted as a 100, 200 or 300 pair version. designation labels are included with the bases.
C at e g o r y 3 S y s t e m s BRAND-REX VOICE SYSTEM (CATEGORY 3 - CLASS C): The Brand-Rex Voice System is a comprehensive system of high quality Voice products forming part of the Brand-Rex range and is therefore backed by a 25 year system warranty for total peace of mind • Compact 1U 25 and 50 port voice panels that give maximum configurable connections at both front and rear • Network termination boxes (30 pair, 50 pair & 100 pair) plus 10 pair disconnection strips • Category 3 voice cable for hi
C at e g o r y 3 S y s t e m s Sheath Polyolefin Insulation PET Tape Annealed Copper Core PRODUCT DESCRIPTION: Brand-Rex VOICE cables consist of 0.51mm Polyolefin insulated conductors formed into one or more units of twisted pairs. The units are identified with coloured binders and are assembled to form the cable core. The core may be protected with one or more layers of dielectric material and is covered by a protective LSZH sheath.
C at e g o r y 3 S y s t e m s Brand-Rex Copper Connectivity - VOICE PRODUCT DESCRIPTION: The 19" rack mounted patch panel is available in 25 and 50 port versions, both have a slimline 1U footprint suitable for compact installations maximising rack space. These panels are supplied with cable ties, earth lead, cable manager, mounting bolts and short form instructions. Unshielded Panels 483 44.
C at e g o r y 3 S y s t e m s PRODUCT DESCRIPTION: Brand-Rex VOICE includes a range of surface mounted telecom boxes for multipair cable termination, surface mounted outlets, 50 x 25mm UK styled faceplate modules and line adaptor fly leads. Brand-Rex Copper Systems - VOICE Connectivity Termination Boxes The range of termination boxes is available in a number of sizes to accommodate up to 10 x 10 pair disconnect termination modules.
C o p p e r A c c e ss o r i e s BRAND-REX COPPER SYSTEMS ACCESSORIES: • A comprehensive range of structured cabling system accessories to complement any Brand-Rex structured cabling system 61
C o p p e r A c c e ss o r i e s Cat 5e Brand-Rex Copper Connectivity - Snap-In-Jack Modular Panels Cat AC6 Cat 7 PRODUCT DESCRIPTION: The Brand-Rex 19" Modular Panel is a rack mounted Snap-In-Jack panel that has been designed with a double skin to provide flush mounted jacks. The rear of the panel has been plated for grounding to the chassis on shielded systems. All outlets are numerically identified with an additional writable surface for ease of port naming.
copper acceSSorieS 6 250MHz 5e 100MHz AC6 500MHz PRODUCT DESCRIPTION: the brand-rex angled Snap-in-Jack patch panel is a 1u 24 port panel that facilitates cord routing directly into the rack vertical side management thus rendering horizontal cable managers redundant. the resultant increased rack density not only saves valuable space but also offers a panel that eases bending stresses on the cord while maximising performance.
copper acceSSorieS Cat 5e Brand-Rex Copper Connectivity - 24 Port Inline Snap-in-Jack Panels Cat 6 Cat AC6 PRODUCT DESCRIPTION: the 19” inline Snap-in-Jack patch panel accommodates 24 ports within a 1u configuration and is compatible with all standard 19” racks and cabinets. all outlets are numerically identified with an additional writable surface allowing for ease of port naming. in addition to this, each panel has been designed with a cable management/ strain relief feature built into the rear.
copper acceSSorieS Cat 5e Cat 6 Cat AC6 PRODUCT DESCRIPTION: the brand-rex 19” Snap-in-Jack patch panel that accommodates 24 ports within a 1u configuration and provides coloured inserts for individual port/service identification. the product is designed and supplied with a detachable rear cable manager and comes complete with black inserts already loaded into the panel as standard.
C o p p e r A c c e ss o r i e s Cat 5e Brand-Rex Copper Connectivity - Blank Panels Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: 1U and 2U blank panels are used to complete any installation in a cabinet. Designed to complement the Brand-Rex range of patch panels, they provide a more aesthetically pleasing finish and offer improved user safety. 44.1 483 PRODUCT CHARACTERISTICS: 1U Rack Mounted Panel Width: 19" (483mm) Panel Height: 1U (44.1mm) Panel Depth: 12.
C o p p e r A c c e ss o r i e s Cat 5e Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: To ensure neat and tidy installations, a range of cable management products is available. These products are either 19" rack mounted or side mounted. Brand-Rex Copper Connectivity - Cable Management Accessories 483 PRODUCT CHARACTERISTICS: 1U 5 Ring Rack Mounted Panel Width: 19” (483mm) Panel Height: 1U (44.45mm) Panel Depth: 65.
C o p p e r A c c e ss o r i e s Cat 5e Brand-Rex Copper Connectivity UK Styled Plastic Outlets and Accessories 25 147 Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: Brand-Rex supplies a comprehensive range of plastic accessories to provide an outlet solution for wall, trunking and floorbox applications. These accessories have been designed to be used in conjunction with Brand-Rex Snap-In Jacks. All UK style faceplates are supplied with M3.
C o p p e r A c c e ss o r i e s 5e 100MHz Brand-Rex Copper Connectivity Snap-In-Jack Modules and Dual Angled Snap-In-Jack Modules 6 250MHz AC6 500MHz PRODUCT DESCRIPTION: Brand-Rex single and double Snap-In Jack Modules have been designed to accept the standard Brand-Rex Snap-In Jacks and are fully compatible with the 'Legrand Mosaic' and our continental UNI style faceplates. PRODUCT CHARACTERISTICS: Dimensions: 45mm x 45mm Depth: 14.
copper acceSSorieS Cat 5e Cross-Connect Cable Management Cat 6 PRODUCT DESCRIPTION: the cable management range complements the set of cross-connect components offered by brand-rex. the horizontal cable organisers can be supplied with or without legs and also as a 19" rack mounted version. PRODUCT CHARACTERISTICS: Dimensions Horizontal cable organiser with legs 271.8 x 46.7 x 111.0mm Horizontal cable organiser without legs 214.9 x 44.0 x 64.0mm Horizontal cable organiser rack mounted 482.6 x 44.0 x 75.
copper acceSSorieS Brand-Rex Copper Components - Consumables and Tools PRODUCT DESCRIPTION: Within the standard brand-rex product range is a set of standard tools for the safe and efficient termination of copper cables. these tools are available for both lSa and 110 style idc connectors. consumables and tools also available is a brand-rex Jack gripper to hold Snap-in-Jacks during termination and the range of snap-in-jack blanks.
OPTiCAL SYSTEMS Brand-Rex is committed to a future in optical cabling and truly believes in the benefits of optical cables for the future requirement of both LAn and WAn networks. Why? Here are some of the benefits of Brand-Rex Optical Systems. • Transmission Security – As optical fibre emits no electromagnetic energy there is no opportunity to intercept transmissions remotely. • Bandwidth – Optical fibre has a much greater data capacity than copper, carrying more data further.
O pt i cal F i bre R a n ge CABLE SELECTION: When selecting the correct cable for any installation the first question will be of fibre type. This is dependent upon the transmission distance and the protocol being adopted. Further on in this section is a key to transmission distances on the main fibre types for 1Gb and 10 Gb Ethernet applications. This key is repeated on each page as a reference. With the choice of fibre type complete, the selection of cable construction must be made.
C abled O pt i cal F i bre S pec i f i cat i o n s The tables below describe the standard fibres supplied by Brand-Rex that comply with or exceed ISO/IEC 11801 and EN50173-1 and EN50173-2 requirements, for use in high speed LAN, MAN, WAN data and telecom networks. Specific Fibre Types to customer specification are available on request.
O pt i cal C able M a n ufactur i n g S ta n dards FibrePlus Standard Cable Range STANDARD SHEATH MARKINGS OPTICAL CABLES: xxxx Brand-Rex Ltd Optical Fibre Cable HF aaa ddd ccc BBB ww/yy To serve the requirements of optical systems customers, Brand-Rex has created a standard range of Tight Buffered and Loose Tube cables that will meet most requirements. The standard specification of these cables is described in detail on this page.
F i B R E P L U S L i n K A n D C H A n n E L T R A n S M i S S i O n D i S TA n C E S Terminal Wall/Floor Outlet Optical Patch Panel Central Computer Room Building Riser Transmission Distance Identification 050 600 600 Fibre Type - 050 Brand-Rex standard identification characters for fibre type used in part numbering.
C able P ropert i es a n d I n stallat i o n Type of Cable Universal Internal External Suitable for both internal and external use. Suitable for internal use. Suitable for external use. Suitable Installation Duct Grade Duct Grade Cable that can be installed into buried duct / sub duct by pulling, winching or blowing. Direct Buried A direct burial grade of cable, which has excellent crush resistance and is designed for direct burial installation.
T ra n sm i ss i o n D i sta n ce by A ppl i cat i o n Cable Range Low Smoke Tight Buffered Type: Distribution Single Fibre Cable Zip Cord Duplex Breakout Breakout Design Family: PDC SFC ZIP DUP BKT Part Number Format: HFfffPDCxxLU HFfffSFCxxL HFfffZIPxxL HFfffDUPxxL HFfffBKTxxLU Type: Field Deployable Fire Survival - - - Design Family: TFD UFS - - - Part Number Format: HFfffTFDxx HFfffUNIxxLSTALUFS - - - Type: Duct Grade Glass Yarn Armoured Direct Burial Direct Buri
CABLE RANGE Application Wave Length Distance 62.
D I S T R I B U T I O N , B R E A K O U T & PAT C H C A B L E S Distribution cables FibrePlus distribution cables are based around standard 900 µm tight buffered element which offers excellent environmental performance. The standard range of distribution cables is available with up to 24 fibres and the cables are designed for use in building backbone applications. Cable can be installed in cable conduits by pulling or alternatively can be laid in roof / floor voids.
P rem i se D i str i but i o n C ables LSZH Sheath Strength Members 900µm Tight Buffered Fibre Compact Design Water Blocked Design Brand-Rex Optical Cables - Universal PDC Low Smoke Halogen Free Sheath Tight Buffered Premise Distribution Cables Product Data Diameter Weight mm kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 2 Fibre 4.80 22 460 50 75 4 Fibre 5.00 25 640 55 80 6 Fibre 5.60 29 730 60 85 8 Fibre 5.90 34 920 65 95 12 Fibre 6.
F i bre Patch C able LSZH Sheath Aramid Strength Members 900µm Tight Buffered Fibre Rugged Construction for Indoor, Short Run Patching Easily configured into patch cords Brand-Rex Optical Cables - SFC and ZIP Ruggedised Fibre Patch Cable Colour coded for identification Product Data Diameter Weight kg / km Max Tensile Load N mm Min Static Bend mm Min Dynamic Bend mm 1 Fibre 2.80 8 200 30 45 2 Fibre 2.80 x 5.
D uple x B reakout C able LSZH Outer Sheath LSZH Unit Sheath Aramid Strength Members 900µm Tight Buffered Fibre Rugged Construction for Indoor, Short Run Patching Brand-Rex Optical Cables - DUP Ruggedised Duplex Breakout Cable Easily configured into patch cords Colour coded for identification Product Data 2 Fibre Diameter Weight kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm mm 3.80 x 6.
B reakout C ables LSZH Outer Sheath LSZH Unit Sheath Non Metallic Central Strength Member Aramid Strength Members 900µm Tight Buffered Fibre Based on 2.80mm ruggedised sub units Brand-Rex Optical Cables - BKT Non metallic central strength member Breakout Cables Product Data Diameter Weight kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm mm 4 Fibre 9.75 85 1000 98 147 6 Fibre 11.40 112 1000 114 171 8 Fibre 13.20 164 1000 132 198 12 Fibre 14.
High speed connectivity for today’s datacentre Brand-Rex provides industry leading cabling solutions into the structured wiring cable markets including the Datacentre sector. This market is an arena where the assured reliability of high speed transmissions on Copper or Fibre multi-connector links is a qualifier. Network resilience and standards conformance are required.
LO O S E T U B E C A B L E S FibrePlus loose tube cables are available in unitube or multi loose tube constructions, in three standard variants. Multi loose tube cables are available as standard in 6 x 4 fibre per tube, 6 x 12 fibre per tube, 8 x 12 fibre per tube, 12 x 12 fibre per tube and 18 x 12 fibre per tubes options, offering up to 216 fibres. The three standard variants are a general duct grade cable; a glass yarn armoured cable and a corrugated steel tape armoured direct burial cable.
D uct G rade U n i tube C ables LSZH or PE Sheath Brand-Rex Optical Cables - UDU and UDE Duct Grade Unitube Cables Gel Filled Loose Tube Product Data Water Blocking Glass Yarns Diameter 4 - 12 Fibre 16 - 24 Fibre (2 x Bundles) mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 6.90 51/37 700 69 104 7.
G lass A rmoured U n i tube LSZH or PE Sheath Brand-Rex Optical Cables - URU and URE Glass Yarn Armoured Unitube Cable Gel Filled Loose Tube Product Data Rodent resistant Glass Yarn Armouring Diameter 4 - 12 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 9.40 104/81 3000 94 141 11.
S teel Tape A rmoured U NI T U B E LSZH or PE Sheath Brand-Rex Optical Cables - USU and USE Gel Filled Loose Tube Steel Tape Armoured Unitube Cables Glass Yarns Product Data Individual Coloured Fibres Diameter 4 - 12 Fibre 16 - 24 Fibre (2 x Bundles) mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 10.50 128/101 700 105 158 10.
S T E E L TA P E A R M O U R E D U NI T U B E LSZH or PE Outer Sheath LSZH or PE Inner Sheath Brand-Rex Optical Cables - UTU and UTE Gel Filled Loose Tube Twin Sheath Steel Tape Armoured Unitube Cables Glass Yarns Individual Coloured Fibres Product Data Corrugated Steel Tape Armour Diameter 4 - 12 Fibre 16 - 24 Fibre (2 x Bundles) mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 13.00 224/155 700 130 195 13.
D uct G rade M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MDU 01 and External MDE 01 Duct Grade Multi Loose Tube Cable Individual Coloured Fibres Product Data Diameter 4 - 24 Fibre Gel Filled Loose Tube mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 10.
D uct G rade M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MDU 02 and External MDE 02 Universal Duct Grade Multi Loose Tube Cable Gel Filled Loose Tube Individual Coloured Fibres Product Data Diameter 12 - 72 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 11.
D U C T G R A D E M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MDU 04 and External MDE 04 Universal Duct Grade Multi Loose Tube Cable Gel Filled Loose Tube individual Coloured Fibres Product Data Diameter 12 - 96 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 12.
D uct G rade M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MDU 03 and External MDE 03 Gel Filled Loose Tube Duct Grade Multi Loose Tube Cable Individual Coloured Fibres Product Data Water Blocking Tape Diameter 96 - 144 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 16.
D U C T G R A D E M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MDU 05 and External MDE 05 Gel Filled Loose Tube Duct Grade Multi Loose Tube Cable individual Coloured Fibres Product Data Water Blocking Tape Diameter 144 - 216 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 16.
G lass Yar n A rmoured M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MRU 01 and External MRE 01 Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable Gel Filled Loose Tube Product Data Rodent Resistant Glass Yarn Armouring Diameter 4 - 24 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 12.
G lass Yar n A rmoured M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MRU 02 and External MRE 02 Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable Gel Filled Loose Tube Rodent Resistant Glass Yarn Armouring Product Data Diameter 12 - 72 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 13.
G L A S S YA R n A R M O U R E D M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MRU 04 and External MRE 04 Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable Gel Filled Loose Tube Rodent Resistant Glass Yarn Armouring Product Data Diameter 12 - 96 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 14.
G lass Yar n A rmoured M ult i L oose T ube C able LSZH or PE Sheath Gel Filled Loose Tube Brand-Rex Optical Cables - Universal MRU 03 and External MRE 03 Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable Rodent Resistant Glass Yarn Armouring Product Data Diameter 96 - 144 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 17.
G L A S S YA R n A R M O U R E D M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MRU 05 and External MRE 05 Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable Gel Filled Loose Tube Rodent Resistant Glass Yarn Armouring Product Data Diameter 144 - 216 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 18.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MSU 01 and External MSE 01 Direct Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 4 - 24 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 12.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MSU 02 and MSE 02 Direct Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 12 - 72 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 13.
S T E E L TA P E A R M O U R E D M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MSU 04 and MSE 04 Direct Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 12-96 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 14.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Sheath Brand-Rex Optical Cables - Universal MSU 03 and External MSE 03 Direct Burial Steel Tape Armoured Multi Loose Tube cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 96 - 144 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 18.
S T E E L TA P E A R M O U R E D M U LT i L O O S E T U B E C A B L E LSZH or PE Sheath Brand-Rex Optical Cables - Universal MSU 05 and External MSE 05 Direct Burial Steel Tape Armoured Multi Loose Tube cable Corrugated Steel Tape Armour Product Data Diameter 144-216 Fibre Gel Filled Loose Tube mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 19.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Outer Sheath LSZH or PE Inner Sheath Brand-Rex Optical Cables - Universal MTU 01 and External MTE 01 Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 4 - 24 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 14.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Outer Sheath LSZH or PE Inner Sheath Brand-Rex Optical Cables - Universal MTU 02 and External MTE 02 Universal Direct Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Diameter 12 - 72 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 15.
S T E E L TA P E A R M O U R E D M U LT i L O O S E T U B E C A B L E LSZH or PE Outer Sheath LSZH or PE inner Sheath Brand-Rex Optical Cables - Universal MTU 04 and External MTE 04 Universal Direct Burial Steel Tape Armoured Multi Loose Tube Cable Gel Filled Loose Tube Product Data Diameter 12 - 96 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 16.
S teel Tape A rmoured M ult i L oose T ube C able LSZH or PE Outer Sheath LSZH or PE Inner Sheath Brand-Rex Optical Cables - Universal MTU 03 and External MTE 03 Direct Burial Steel Tape Armoured Multi Loose Tube cable Gel Filled Loose Tube Corrugated Steel Tape Armour Product Data Diameter 96 - 144 Fibre mm Weight (U)/(E) kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm 20.
S T E E L TA P E A R M O U R E D M U LT i L O O S E T U B E C A B L E Outer LSZH or PE Sheath inner LSZH Sheath Brand-Rex Optical Cables - Universal MTU 05 and External MTE 05 Direct Burial Steel Tape Armoured Multi Loose Tube cable Gel Filled Loose Tube Product Data Corrugated Steel Tape Armour Diameter 144-216 Fibre mm Weight (U)/(E) kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm 20.
D uct G rade C able w i th M o i sture B arr i er Polyethylene Sheath Brand-Rex Optical Cables - External MAE 01 Gel Filled Loose Tube External Duct Grade Cable with Aluminium Moisture Barrier Al/PE Moisture Barrier Product Data Individual Coloured Fibres Diameter Weight mm 10.
D uct G rade C able w i th M o i sture B arr i er Polyethylene Sheath Brand-Rex Optical Cables - External MAE 02 Gel Filled Loose Tube External Duct Grade Cable with Aluminium Moisture Barrier Al/PE Moisture Barrier Product Data Diameter Weight mm 11.
D uct G rade C able w i th M o i sture B arr i er Polyethylene Sheath Brand-Rex Optical Cables - External MAE 04 Gel Filled Loose Tube Product Data Al/PE Moisture Barrier External Duct Grade Cable with Aluminium Moisture Barrier Diameter Weight mm 11.
D uct G rade C able w i th M o i sture B arr i er Polyethylene Sheath Brand-Rex Optical Cables - External MAE 03 External Duct Grade Cable with Aluminium Moisture Barrier Gel Filled Loose Tube Product Data Al/PE Moisture Barrier 96 - 144 Fibre Diameter Weight kg / km Max Tensile Load N Min Static Bend mm Min Dynamic Bend mm mm 16.
DUCT GRADE CABLE WiTH MOiSTURE BARRiER Polyethylene Sheath Brand-Rex Optical Cables - External MAE 05 External Duct Grade Cable with Aluminium Moisture Barrier Gel Filled Loose Tube Product Data Al/PE Moisture Barrier 144-216 Fibre Diameter Weight kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm mm 16.
SPECIAL ENVIRONMENT CABLES Brand-Rex is pleased to offer FibrePlus cables for specialist applications. Two FibrePlus cables are described in this section. The UFS Fire Survival cable is used in areas where critical data transmission must continue when the building structure in which it is installed is on fire. For this reason its use in large public buildings such as datacentres, airports, railway stations, stadia and onshore/ offshore industrial structures is becoming increasingly common.
F i R E S U R V i VA L C A B L E LSZH Outer Sheath Corrugated Steel Tape Armour LSZH inner Sheath Water Blocking Glass Yarns Fire Retardant Tape Gel Filled Loose Tube individual Coloured Fibres Brand-Rex Optical Cables - Universal UFS 01 Unitube Fire Survival Cable Independent 3rd party tested (BRE) Unitube design offering up to 24 fibres Layer of fire retardant tape Twin low smoke halogen-free sheaths 4.00mm gel filled loose tube Product Data Diameter Weight mm 13.
F i E L D D E P L O YA B L E C A B L E TPE Sheath Aramid Strength Members High Performance Tight Buffered Fibre Suitable for Field Deployment Approved to Def-Stan 60-1 part 3 Thermoplastic Elastomer Sheath Brand-Rex Optical Cables - Universal TFD Tight Buffered Field Deployable Cable Product Data Diameter Weight kg / km Max Tensile Load n Min Static Bend mm Min Dynamic Bend mm mm 2 Fibre 4 Fibre 5.00 25 2000 50 75 5.50 28 2000 55 80 Product Part Numbering 62.
SIGN UP FOR MORE INFORMATION All the information you need to keep you up to date in your datacoms choices is just a click away: SmartPat ch is a hig connec tivity and hly advanced overlay utilisatio by office system n whilst moves that allo and add provid the too ws net ing sim itions.
OPTICAL COMPONENTS FibrePlus is a comprehensive range of premium products including Single Mode and Multi Mode Pigtails and Patch cords using ST, SC, FC and Small Form Factor MT-RJ and LC Connectors and Adaptors. For rack management the Compact Plus Optical Patch Panel, Cable Management Plates and Modules offer a flexible cost effective solution with the ability to cater for growth and churn.
O pt i cal S ystems Brand-Rex Optical Components - Patch Cords 62.5/12.5 Multi Mode Optical Patch Cords Manufactured to comply with: ISO/IEC 11801 : 2002, EN50173 -1 : 2002, ANSI TIA/EIA 568B Optical Performance (IEC 60874-1 Method 7) ST SC FC-PC MT-RJ LC Insertion Loss Max dB 0.5 0.5 0.5 0.75 0.5 Insertion Loss Typical dB 0.2 0.2 0.2 0.4 0.2 Return Loss Min dB 20.0 20.0 20.0 20.0 20.
O pt i cal S ystems Brand-Rex Optical Components - Patch Cords 50/125 Multi Mode Optical Patch Cords Manufactured to comply with: ISO/IEC 11801 : 2002, EN50173 -1 : 2002, ANSI TIA/EIA 568B Optical Performance (IEC 60874-1 Method 7) ST SC FC-PC MT-RJ LC Insertion Loss Max dB 0.5 0.5 0.5 0.75 0.5 Insertion Loss Typical dB 0.2 0.2 0.2 0.4 0.2 Return Loss Min dB 20.0 20.0 20.0 20.0 20.
O pt i cal S ystems Brand-Rex Optical Components - Patch Cords 50/125 OM3 Multi Mode Optical Patch Cords Manufactured to comply with: ISO/IEC 11801 : 2002, EN50173 -1 : 2002, ANSI TIA/EIA 568B Optical Performance (IEC 60874-1 Method 7) ST SC FC-PC MT-RJ LC Insertion Loss Max dB 0.5 0.5 0.5 0.75 0.5 Insertion Loss Typical dB 0.2 0.2 0.2 0.4 0.2 Return Loss Min dB 20.0 20.0 20.0 20.0 20.
O pt i cal S ystems Brand-Rex Optical Components - Patch Cords Single Mode Optical Patch Cords Manufactured to comply with: ISO/IEC 11801 : 2002, EN50173 -1 : 2002, ANSI TIA/EIA 568B Optical Performance (IEC 60874-1 Method 7) All major connector types ST SC FC-PC MT-RJ LC Insertion Loss Max dB 0.3 0.3 0.3 0.75 0.3 Duplex patch cords feature ‘Crossover’ Insertion Loss Typical dB 0.2 0.2 0.2 0.4 0.1 OS1 Grade Fibre Return Loss Min dB 45.0 45.0 45.0 26.0 45.
O pt i cal P i gta i ls Manufactured to comply with: ISO/IEC 11801 : 2002, EN50173 -1 : 2002, ANSI TIA/EIA 568B Single Mode and Multi Mode Optical Pigtails Based on Tight Buffered Core 900µm and 600µm All major connector types Optical Performance (IEC 60874-1 Method 7) All major fibre types ST SC FC-PC MT-RJ LC MM/SM Insertion Loss Max dB 0.5 0.5 0.5 0.75 0.5/0.3 Insertion Loss Typical dB 0.2 0.2 0.2 0.4 0.2/0.1 Multi Mode Return Loss Min dB 20.0 20.0 20.0 20.0 20.
OPTiCAL SYSTEMS Enhanced sliding tray for easy access Brand-Rex Optical Components - Compact Plus Patch Panels complete with quick release fastenings Compact Plus - Unloaded Panels & Panel Options Adjustable mounting brackets aids installation within shallow enclosures Minimum depth 235mm Rear of panel offers a range of apertures to accommodate a variety of gland configurations Front panel configuration options: 24 way ST,SC, FC-PC, LC and MT-RJ 48 way Duplex SC, Duplex LC or MT-RJ • Unloaded panels are
OPTiCAL SYSTEMS Compact Plus Panels are pre loaded with Fibre Optic adaptors Brand-Rex Optical Components - Compact Plus Patch Panels Compact Plus - Part Loaded Panels Front Panel for up to 24way FC, ST, SC 12 way DC, 48way LC, MT-RJ Minimum depth 235mm Front Panel includes a port identification strip Suitable for Blolite PRODUCT DESCRIPTION: The new fibre plus 19” 1U fibre Optic Patch Panel has been redesigned to optimise both the internal fibre management but also to add greater fibre density.
O pt i cal S ystems SC Simplex Connector: SC Simplex Adaptor: SC multimode and single mode connector kits comprise of a one piece SC Adaptors comprise of a polymer outer body and inner assembly SC body with precision ceramic ferrule, crimp, sleeve, colour coded outer shroud, fitted with a precision alignment sleeve. Multimode with metal 2 x colour coded 3mm strain relief boots and a 0.9mm boot. sleeve. Single mode with Ceramic Sleeve.
O pt i cal S ystems ST Connector: ST Adaptor: ST connector kits comprise of a nickel plated zinc coupling body with ST adaptors comprise of a nickel plated zinc die cast body with a precision ceramic ferrule, crimp sleeve, 2 x colour coded 3mm strain a precision alignment sleeve. They are both standard and double reliefs and a 0.9mm boot. ‘D’ hole compatible. Multimode with metal sleeve. Single mode with ceramic sleeve.
O pt i cal S ystems PRODUCT DESCRIPTION: The range of Brand-Rex SFF (Small Form Factor) connectivity solutions are reliable and robust, quality products. SFF connectors are duplex fibre connectors which have a footprint similar to RJ-45's, offering the system integrator / installer an improved patching density, saving valuable rack space. The products can be used at the panel or in the work area supporting both backbone fibre and fibre to the desk solutions.
O pt i cal S ystems Brand-Rex Optical Components - Wall and Floor Outlets Available for most connector types; SC Simplex, SC Duplex, ST, LC, MT-RJ Allows up to 2 Fibre Terminations per Module (Small Form Factor all 4 Fibres per Module) Angled Fibre Optic Module supplied with Adaptors 147 86 Compatible Standard Modular Wall Mounted Faceplates PRODUCT DESCRIPTION: A range of wall and floor mounted angled housings for use with fibre optic terminations, designed for mounting on a standard modular range fac
O pt i cal S ystems PRODUCT DESCRIPTION: Brand-Rex offers a range of termination kits for epoxy-polish type connectors. The Starter Kit is a comprehensive tool kit, which includes all the tools necessary to achieve quality terminations in the workshop, lab or on-site. The FibrePlus Tool Wallet contains all the hand tools necessary for preparing and terminating Brand-Rex ST/SC/FC connectors, and the Conversion Kit consists of the correct crimp tool and polishing puck for Brand-Rex SC/ST/FC connectors.
O pt i cal S ystems FibrePlus 500 Termination Consumable Kit: FibrePlus 50 Termination Consumable Kit: The FibrePlus 500 Termination Consumable Kit contains: The FibrePlus 50 Termination Consumable Kit contains: Polishing film, epoxy, cleaning solvent and tissues sufficient Polishing film, epoxy, cleaning solvent and tissues sufficient for 500 on-site terminations. for 50 on-site terminations.
A i r B low n F i bre S ystems Customer requirements in the ever-advancing communications market continues to grow, stretching scarce bandwidth resources and truly testing the performance of today’s networks. In choosing cabling system solutions, whether for small, medium or large multi site locations, server farms or co-location datacentres, network planners have some serious issues to consider.
A i r B low n F i bre S ystems Brand-Rex Air Blown Fibre - Blolite Blolite Internal MultiDucts Product Data LSZH Outer Sheath kg / km Max Tensile Load N Min Static Bend mm 5.0 29 70 25 4w 3mm (PO) - I 9.3 67 150 93 7w 3mm (PO) - I 11.7 89 400 113 12w 3mm (PO) - I 15.2 126 500 152 19w 3mm (PO) - I 17.7 165 1000 173 Single 5mm MicroDuct 5.0 15 50 25 2w 5mm (LSZH) - I 7.5 x 13.0 100 300 40 4w 5mm (LSZH) - I 15.2 157 500 128 7w 5mm (LSZH) -I 18.
A i r B low n F i bre S ystems Brand-Rex Air Blown Fibre - Blolite Blolite External MultiDucts PE Outer Sheath Product Data Diameter Weight mm 1w 5mm (LSZH) - O 2w 5mm (LSZH) - O 4w 5mm (LSZH) - O Coated Aluminium Tape kg / km Max Tensile Load N Min Static Bend mm 7.5 38 380 40 7.5 x 13.0 98 630 60 15.2 139 900 180 7w 5mm (LSZH) - O 18.6 200 1250 250 12w 5mm (LSZH) - O 24.0 307 1800 310 19w 5mm (LSZH - O 29.6 433 2600 370 1w 8mm (LSZH) - O 10.
AiR BLOWn FiBRE SYSTEMS MicroDuct Size Selection Guidelines - Size vs Fibre Count Single Blown Fibre Elements Outer Buffer Layer First Buffer Layer Primary Coating 125µm Cladding Fibre Core MicroDuct Size Selection Guidelines Blowing Distance (Metres) Unique ‘Blowable’ coating 1 Fibre 2 Fibre 4 Fibre 6 Fibre 8 Fibre 12 Fibre 100 3mm 3mm 3mm 5mm 5mm 5mm 200 3mm 3mm 3mm 5mm 5mm 5mm 300 3mm 3mm 3mm 5mm 5mm 5mm 400 3mm 3mm 5mm 5mm 5mm 5mm 500 3mm 3mm 5mm 5mm 5mm 8mm
A i r B low n F i bre S ystems LSZH or PE Sheath Gel Filled Loose Tube Individual Coloured Fibres Rigid Glass Central Strength Member Water Blocking Tape Brand-Rex Air Blown Fibre - Blolite+ PRODUCT DESCRIPTION: Microduct cabling systems are popular solutions for building flexibility into a network, they can be populated when needed and leave spare capacity for future growth.
AiR BLOWn FiBRE SYSTEMS Brand-Rex Air Blown Fibre - Blolite+ Blolite+ External Protected MultiDucts PE outer sheath Aluminium tape Microduct Available with 10 mm MicroDucts Aluminium Moisture Barrier MicroDuct Coloured for Identification Product Data Diameter mm Weight kg/km Max Tensile Load N Min Static Bend radius mm 1w 10mm (PER) – O 13.5 96 1000 135 4w 10mm (PER) – O 28.6 250 1500 290 7w 10mm (PER) – O 34.
A i r B low n F i bre S ystems PRODUCT DESCRIPTION: Within Blolite+ a range of plastic bodied pneumatic tube connectors are used for tube routing. The connectors have a variety of forms and are all rated for the maximum working pressure used on Blolite+ of 10 Bar. The connectors are installed with a simple push-pull technique and can be re-used several times. Straight Connector: End Plug: Gas Blocking ‘T’: For connecting 2 equal For blocking a straight For use with resin to size microducts.
A i r B low n F i bre S ystems Radial Tube Cutter Duct Stripping Tool 4.5mm - 29.00mm Duct Stripping Tool 19.0mm - 40.00mm Brand-Rex Air Blown Fibre Tools Product Part Numbering Part Number Radial Tube Cutter 54-0100-00 Duct Stripping Tool 4.5mm - 29.00mm 54-0201-00 Duct Stripping Tool 19.00mm - 40.
NOTES .................................................................................................................................................................................................. .................................................................................................................................................................................................. ...................................................................................................................
NOTES .................................................................................................................................................................................................. .................................................................................................................................................................................................. ...................................................................................................................
brand-rex london 72 cannon street london EC4N 6AE united kingdom brand-rex head office viewfield industrial estate glenrothes, fife KY6 2RS united kingdom tel: +44 (0) 1592 772124 fax: +44 (0) 1592 775314 brand-rex argentina c/ingeniero butty 240, piso 4º (C1001AFB) buenos aires argentina tel: +54 11 4590-2242 / 4 fax: +54 11 4590-2201 brand-rex asia pacific 17/F prosperity centre 77-81 container port road kwai chung hong kong tel: fax: +852 3620 2602 +852 3621 0018 brand-rex china room B105-A23, FESCO b