Copper Systems
Copper Systems Contents Augmented Category 6 Systems 10GPlus Page 1.3 Category 7 Systems U-MediaPlus Page 1.11 Category 6 Systems Cat6Plus Page 1.13 Category 5e Systems GigaPlus Page 1.29 Category 3 Systems Voice Page 1.47 Copper System Accessories Structured cabling systems of today and in the future structured cabling world have to cope with the ever-growing demands of greater and greater bandwidth absorption within the local area network.
Product Descriptors Explained Cable Properties A simple legend system has been adopted throughout this brochure. The detail listed here provides descriptions of the symbols used. These symbols describe the physical properties of the cable, and where cables are to be used.
Augmented Category 6 Systems Waking up to a new era 10 Gigabit Ethernet over copper cabling systems has been heralded as the greatest technological revolution in networking since the birth of Ethernet. The engineering science dedicated to overcoming the boundaries of convention should not be underestimated. Brand-Rex has dedicated a team of design engineers, technologists and laboratory technicians to developing the highest performance 10 Gigabit Ethernet solution on the market today.
Augmented Category 6 Systems PRODUCT DESCRIPTION The Brand-Rex 10GPlus product set is a premium quality, high performance, future proof, cabling system. 10GPlus is classified as an Augmented Category 6 and Class EA product set which is fully backward compatible to Category 6 (Class E) and Category 5e (Class D) solutions. Riser / Backbone Horizontal Cabling Wired Outlet It is a product set which is designed to be compliant with the new IEC Class EA and TIA 568B.
Augmented Category 6 Systems AC6 500MHz Sheath Cross Filler 23 AWG PACW Polyolefin Insulation Designed to be compliant with the following draft standards: • ISO 11801:2002 Amm1.1, ISO 61156-5 ed 2, EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.2-10 Cable Standards The cable is backwards compatible with: • ISO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 502886-1, ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.
Augmented Category 6 Systems AC6 500MHz Sheath AI/PET Tape AI/PET Tape Polyolefin Insulation Cable Standards The cable is compliant with: • ISO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 50288-5-1 ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.2-1 It is also designed to be compliant with the following draft standards when they are published: • ISO 11801:2002 Amm1.1, ISO 61156-5 ed 2 , EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.
Augmented Category 6 Systems AC6 500MHz Sheath TACW Braid AI/PET Tape Cellular Polyolefin Insulation Cable Standards The cable is compliant with: • ISO 11801:2002, ISO 61156-5, EN 50173-1:2002, EN 50288-5-1 ANSI/TIA/EIA 568B, ANSI/TIA/EIA 568B.2-1 It is also designed to be compliant with the following draft standards when they are published: • ISO 11801:2002 Amm1.1, ISO 61156-5 ed 2 , EN 50173-1 ed2 EN 50288-10-1, ANSI/TIA/EIA 568B.
Augmented Category 6 Systems AC6 500MHz PRODUCT DESCRIPTION: The Brand-Rex Augmented Category 6 patch cord is part of the Brand-Rex 10GPlus cabling system. The 10GPlus cabling system is comprised of high performance cables and connectivity which not only provide a reliable platform for all of today’s network applications, but is also designed to future-proof networks for the emerging, new, higher speed protocols of tomorrow, such as 10GBASE-T.
Augmented Category 6 Systems AC6 500MHz Brand-Rex Copper Connectivity - 10GPlus Augmented Category 6 Modular Panel PRODUCT DESCRIPTION The Brand-Rex Augmented Category 6 Snap-InJack panel is part of the Brand-Rex 10GPlus cabling system.
Augmented Category 6 Systems AC6 5e 100 500MHz Brand-Rex Copper Connectivity - 10GPlus Jacks Augmented Category 6 Snap-In-Jacks PRODUCT DESCRIPTION: The Brand-Rex 10GPlus Snap-In-Jack offers true Class EA component performance using a patented contact array design. The 10GPlus system is classified as an Augmented Category 6 and Class EA product set that is fully backwards compatible to Category 6 (Class E) and Category 5e (Class D) products.
Category 7 Systems BRAND-REX CATEGORY 7 CABLING (CATEGORY 7 - CLASS F): Key Features • U-MediaPlus is a range of universal media cables that exceed the Category 7 requirements of ISO/IEC 11801 : 2002 and EN 50173-1 : 2002. • Third party independent certificates of compliance (from 3P) are available. • Provides a foundation for supporting high bandwidth applications. • Multi Gigabit capability. • Individual and overall shielding providing outstanding EMI/RFI protection. • Backward compatibility guaranteed.
Category 7 Systems 7 600MHz Sheath TACW Braid AI/PET Tape 23 AWG PACW Cellular Polyolefin Insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-4-1 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: U-MediaPlus S/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class F/Cat 7 cables to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 6 Systems BRAND-REX CAT6PLUS SYSTEM (CATEGORY 6 - CLASS E): Key Features • Cat6Plus is standards compliant • Cat6Plus is third party independently verified by 3P and GHMT • Third party independent certificates of compliance are available for component and channel performance from 3P Inc.
Category 6 Systems The Cat6Plus System Structured wiring systems comprised of Cat6Plus cables, patch leads and connectivity are designed to be compliant with the current sets of Class E / Category 6 published and draft standards requirements as an absolute minimum. The systems support all protocols defined in current editions, and amendments, of ISO 11801:2002, ANSI/TIA/EIA 568B.2.1 : 2002 and EN50173-1:2002 (including IEEE802.3ab Gigabit Ethernet) and are fully backward compatible.
Category 6 Systems 6 250MHz Sheath Cross Filler Solid PE Insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-6-1 ANSI/TIA/EIA 568B.2.1 : 2002 23 AWG PACW Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus U/UTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 6 Systems 6 250MHz Sheath Polyester Tape AI/PET Tape Polyolefin Insulation 23 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 TACW Drainwire PRODUCT DESCRIPTION: Cat6Plus U/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 6 Systems 6 250MHz Sheath AI/PET Tape AI/PET Tape Cellular Polyolefin Insulation 23 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 TACW Drainwire Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus F/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 6 Systems 6 250MHz Sheath TACW Braid AI/PET Tape Cellular Polyolefin Insulation 23 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-5-1 ANSI/TIA/EIA 568B.2.1 : 2002 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: Cat6Plus S/FTP, 100 Ω, 4x2xAWG 23/1 premium grade Class E/Cat 6 cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 6 Systems 6 250MHz The Brand-Rex 8 Point Patch Cord Promise 1. Cat6Plus patch cords employ independently verified Category 6 cable 2. Cat6Plus patch cords are manufactured using leading brand Category 6 conformant RJ-45 modular plugs 3. Cat6Plus patch cords are manufactured with a flexible strain relief boot as standard 4. Cat6Plus patch cords are manufactured using only quality approved assembly houses to the exacting requirements of Brand-Rex purchase specification 5.
Category 6 Systems 6 250MHz The Brand-Rex 8 Point Patch Cord Promise 1. Cat6Plus patch cords employ independently verified Category 6 cable 2. Cat6Plus patch cords are manufactured using leading brand Category 6 conformant RJ-45 modular plugs 3. Cat6Plus patch cords are manufactured with a flexible strain relief boot as standard 4. Cat6Plus patch cords are manufactured using only quality approved assembly houses to the exacting requirements of Brand-Rex purchase specification 5.
Category 6 Systems 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Panels PRODUCT DESCRIPTION: The Cat6Plus 19" rack mounted patch panel offers true Category 6 component performance using a new patented contact pin array design. All panels are backward compatible. The modular jacks that are used in blocks of 8 are individually shielded to give superior shielding. Category 6 Panel with cable management 44.
Category 6 Systems 5e 6 250 100MHz Brand-Rex Copper Connectivity - Cat6Plus Jacks PRODUCT DESCRIPTION: The Brand-Rex Cat6Plus Snap-In-Jack offers true Category 6 component performance using a new patented contact array design. The jack is backward compatible and also fully compatible with all our UK and continental style faceplates and products. Jacks are supplied with a shortform installation instruction.
Category 6 Systems 5e 6 250 100MHz Brand-Rex Copper Connectivity - Cat6Plus Outlets PRODUCT DESCRIPTION: The Brand-Rex Cat6Plus Unshielded Triple Outlet offers a high density outlet solution with true Category 6 component performance. The outlet is backward compatible with our UK and continental UNI style faceplates providing a 3 or 6 RJ-45 solution for high density outlet installations.
Category 6 Systems 5e 6 250 100MHz Brand-Rex Copper Connectivity - Cat6Plus Outlets PRODUCT DESCRIPTION: The Brand-Rex combined shielded outlet and RJ-45 socket has the same proven Category 6 performance as our Cat6Plus panels. Primarily designed for mounting into duct or trunking using a 45mm diameter hole, the outlet can be either flush or wall mounted by using the 80 x 80mm continental styled faceplate and 33mm back box. Category 6 European Style Outlet 69 69.
Category 6 Systems 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Tower Units PRODUCT DESCRIPTION: The tower mount frame provides a modular, high density, cross-connect and cable management system. The base tower is supplied as a 288 pair unit but the capacity can be increased using additional extension frames. Tower units are supplied with wiring bases and connector blocks for 288 pair.
Category 6 Systems 6 250MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Patchcord PRODUCT DESCRIPTION: Cross-connect patchcords are available in 110 to 110 style or 110 to RJ45 style. The standard Category 6 110 connector is supplied in a 4 pair version only. PRODUCT CHARACTERISTICS: Conformance: Category 6 ANSI/TIA/EIA 568B.2.1 Product Part Numbering 110 – 110 110 – RJ45 Cross Connect Patch Cord - 1.0m C6C110110PC010 C6C110RJ4PC010 Cross Connect Patch Cord - 1.
Category 6 Systems Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 5e Cross-Connect Patchcord Product Part Numbering Category 6 110 4 pair Insertion Tool Category 6 110 4 pair Replacement Head C6C1104PIT C6C1104PITRH 1.27 PRODUCT DESCRIPTION: To ensure correct termination of Brand-Rex’s Category 6 Cross Connect solution it is advised to use a specially designed Insertion tool.
Category 6 Systems 5e 6 250 100MHz Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Wiring Bases and Connector Blocks PRODUCT DESCRIPTION: Wiring Base The Category 6 110 wiring base can be supplied as a 48, 96 or 288 pair version, with or without legs. It can also be supplied rack mounted as a 96, 192 or 288 pair version. Designation labels are included with the bases.
Category 5e Systems BRAND-REX GIGAPLUS SYSTEM (CATEGORY 5E - CLASS D): Key Features • GigaPlus is a fully standards compliant open system • GigaPlus exceeds the requirements of ISO/IEC 11801 : 2002 and EN 50173-1 : 2002 for Class D channels and ANSI/TIA/EIA 568B.
Category 5e Systems The GigaPlus System Structured wiring systems comprised of GigaPlus cables, patch cords and connectivity are designed to be compliant with the current sets of Class D / Category 5e published standards requirements as an absolute minimum. The systems support all protocols defined in current editions, and GigaPlus is a premium grade cabling system that is characterised to 200MHz.
Category 5e Systems 5e 100MHz Sheath 24 AWG PACW Polyolefin Insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-3-1 ANSI/TIA/EIA 568B.2 : 2002 Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus U/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit Ethernet protocol for installation in horizontal and backbone areas.
Category 5e Systems 5e 100MHz Sheath AI/PET Tape 24 AWG PACW Polyolefin Insulation ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-2-1 ANSI/TIA/EIA 568B.2 : 2002 TACW Drainwire Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus F/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit Ethernet protocol combined with good EMI/RFI protection for installations in horizontal and backbone areas.
Category 5e Systems 5e 100MHz Sheath TACW Braid AI/PET Tape 24 AWG PACW ISO/IEC 11801 : 2002 ISO/IEC 61156-5 EN 50173-1 : 2002 EN 50288-2-1 ANSI/TIA/EIA 568B.2 : 2002 Polyolefin Insulation Independent 3rd Party Certification (3P) PRODUCT DESCRIPTION: GigaPlus SF/UTP 100 Ω 4x2xAWG 24/1 premium grade Class D/Cat5e cable to support Gigabit Ethernet protocol combined with exceptional EMI/RFI protection for installations in horizontal and backbone areas.
Category 5e Systems 5e 100MHz The Brand-Rex 7 Point Patch Cord Promise 1. GigaPlus patch cords are independently verified by 3P 2. GigaPlus patch cords are manufactured using leading brand Category 5e conformant RJ-45 modular plugs 3. GigaPlus patch cords are manufactured with a flexible strain relief boot as standard. 4. GigaPlus patch cords are tested in accordance with our AQL plan for Category 5e standards conformance 5. GigaPlus patch cords are available in screened and unscreened constructions 6.
Category 5e Systems 5e 100MHz The Brand-Rex 7 Point Patch Cord Promise 1. GigaPlus patch cords are independently verified by 3P 2. GigaPlus patch cords are manufactured using leading brand Category 5e conformant RJ-45 modular plugs 3. GigaPlus patch cords are manufactured with a flexible strain relief boot as standard 4. GigaPlus patch cords are tested in accordance with our AQL plan for Category 5e standards conformance 5. GigaPlus patch cords are available in screened and unscreened constructions 6.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Panels PRODUCT DESCRIPTION: The GigaPlus 19" rack mounted patch panel offers true Category 5e component performance using patented state of the art printed circuit technology. All outlets are numerically identified with an additional writable surface for ease of port naming. Each panel is supplied with cable ties, panel mounting accessories and short form installation instructions.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Panels PRODUCT DESCRIPTION: The GigaPlus 19" rack mounted patch panel offers true Category 5 component performance using patented state of the art printed circuit technology. Category 5e Panel - with Cable Management 44.1 483 Available in 16 and 24 port versions, these panels have a cable management / strain relief feature built into the rear mounted grounding bar.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Jacks Category 5e Snap-In Lead Frame Jacks - Shielded and Unshielded PRODUCT CHARACTERISTICS: Outlet Style: Shielded / Unshielded Keystone type with Unkeyed RJ-45 ports Cable Entry: Top and Rear Hole Plate Thickness: 1.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Jacks PRODUCT DESCRIPTION: GigaPlus Shielded and Unshielded Snap-In-Jacks offer true Category 5e component performance. The jacks are backward compatible and also fully compatible with all our UK and Continental style faceplates and products. Each jack is supplied with a short form installation instruction and cable tie.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Modules Category 5e Slimline Shuttered Modules - Shielded and Unshielded 25 50 25 18.6 38.6 7.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Outlets PRODUCT DESCRIPTION: The Brand-Rex GigaPlus Unshielded Triple Outlet offers a high density outlet solution with true Category 5e component performance. The outlet is backward compatible with our UK and continental UNI style faceplates providing a 3 or 6 RJ-45 solution for high density outlet installations.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Outlets PRODUCT DESCRIPTION: The Brand-Rex combined shielded outlet and RJ-45 socket has the same true Category 5e performance as our GigaPlus panels. Primarily designed for mounting into duct or trunking using a 45mm diameter hole, the outlet can be either flush or wall mounted by using the 80 x 80mm continental styled faceplate and 33mm back box. Category 5e European Style Outlet 69.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Tower Units PRODUCT DESCRIPTION: The tower mount frame provides a modular, high density, cross connect and cable management system. The base tower is supplied as a 300 pair unit but the capacity can be increased using additional extension frames. Tower units are supplied with wiring bases and connector blocks for 300 pair.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Patch Cord Product Part Numbering Cross Connect Patch Cord - 1.0m 110 – 110 1 Pair 110 – 110 4 Pair 110 – RJ45 GPC110110PC010-1 GPC110110PC010-4 GPC110RJ4PC010 Cross Connect Patch Cord - 1.5m GPC110110PC015-1 GPC110110PC015-4 GPC110RJ4PC015 Cross Connect Patch Cord - 2.0m GPC110110PC020 -1 GPC110110PC020-4 GPC110RJ4PC020 Cross Connect Patch Cord - 3.
Category 5e Systems 5e 100MHz Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Wiring Bases and Connector PRODUCT DESCRIPTION: Wiring Base The Category 5e 110-wiring base can be supplied as a 50, 100 or 300 pair version, with or without legs. It can also be supplied rack mounted as a 100, 200 or 300 pair version. Designation labels are included with the bases.
MORE HEADROOM? Structured cabling systems manufactured by Brand-Rex are designed to offer exceptional performance, underpinned by the most comprehensive 25-year warranty on the market. In an area where aesthetics are no guarantee of quality, Brand-Rex offers high quality and reliable solutions for copper and optical cabling. Brand-Rex – performance through design excellence.
Category 3 Systems BRAND-REX VOICE SYSTEM (CATEGORY 3 - CLASS C): The Brand-Rex Voice System is a comprehensive system of high quality Voice products forming part of the Brand-Rex range and is therefore backed by a 25 year system warranty for total peace of mind • Compact 1U 25 and 50 port voice panels that give maximum configurable connections at both front and rear • Network termination boxes (30 pair, 50 pair & 100 pair) plus 10 pair disconnection strips • Category 3 voice cable for higher performanc
Category 3 Systems 5e 6 250 100MHz Sheath Polyolefin Insulation PET Tape Annealed Copper Core PRODUCT DESCRIPTION: Brand-Rex VOICE cables consist of 0.51mm Polyolefin insulated conductors formed into one or more units of twisted pairs. The units are identified with coloured binders and are assembled to form the cable core. The core may be protected with one or more layers of dielectric material and is covered by a protective LSZH sheath.
Category 3 Systems Brand-Rex Copper Connectivity - VOICE PRODUCT DESCRIPTION: The 19" rack mounted patch panel is available in 25 and 50 port versions, both have a slimline 1U footprint suitable for compact installations maximising rack space. These panels are supplied with cable ties, earth lead, cable manager, mounting bolts and short form instructions. Unshielded Panels 483 44.
Category 3 Systems PRODUCT DESCRIPTION: Brand-Rex VOICE includes a range of surface mounted telecom boxes for multipair cable termination, surface mounted outlets, 50 x 25 mm UK styled faceplate modules and line adaptor fly leads. Termination Boxes The range of termination boxes are available in a number of sizes to accommodate up to 10 x 10 pair disconnect termination modules.
Copper Accessories BRAND-REX COPPER SYSTEMS ACCESSORIES: • A comprehensive range of structured cabling system accessories to complement any Brand-Rex structured cabling system 1.
Copper Accessories Cat 5e Brand-Rex Copper Connectivity - Snap-In-Jack Modular Panels 483 10 483 10 Product Part Numbering 16 Port 24 Port 32 Port 48 Port Modular Snap In Jack Panel - Black MMCPNLX16SIJ2 MMCPNLX24SIJ2 MMCPNLX32SIJ2 MMCPNLX48SIJ2 Modular Snap In Jack Panel - Grey MMCPNLX16SIJ8 MMCPNLX24SIJ8 MMCPNLX32SIJ8 MMCPNLX48SIJ8 Modular Panel Cable Manager - Black MMCACCCMSIJ2 Modular Panel Cable Manager - Grey MMCACCCMSIJ8 Note: Panels supplied empty, Snap-In-Jacks must be purch
Copper Accessories Cat 5e Brand-Rex Copper Connectivity - Blank Panels Cat AC6 Cat 7 PRODUCT DESCRIPTION: 1U and 2U blank panels are used to complete any installation in a cabinet. Designed to complement the Brand-Rex range of patch panels, they provide a more aesthetically pleasing finish and offer improved user safety. 483 44.1 Cat 6 PRODUCT CHARACTERISTICS: 1U Rack Mounted Panel Width: 19" (483mm) Panel Height: 1U (44.1mm) Panel Depth: 12.50mm Colour: RAL 9005 Black or RAL 7035 Grey Material: 2.
Copper Accessories Cat 5e Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: To ensure neat and tidy installations, a range of cable management products is available. These products are either 19" rack mounted or side mounted. Brand-Rex Copper Connectivity - Cable Management Accessories 483 PRODUCT CHARACTERISTICS: 1U 5 Ring Rack Mounted Panel Width: 19” (483mm) Panel Height: 1U (44.45mm) Panel Depth: 65.2mm Ring Dimensions: 60mm x 40mm x 13mm Colour: RAL 9005 Black or RAL 7035 Grey Material: 2.
Copper Accessories Cat 5e Brand-Rex Copper Connectivity - UK Styled Plastic Outlets and Accessories 25 147 Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: Brand-Rex supplies a comprehensive range of plastic accessories to provide an outlet solution for wall, trunking and floorbox applications. These accessories have been designed to be used in conjunction with Brand-Rex Snap-In Jacks. All UK style faceplates are supplied with M3.
Copper Accessories Cat 5e Brand-Rex Copper Connectivity - Snap-In-Jack Modules Cat 6 Cat AC6 Cat 7 PRODUCT DESCRIPTION: Brand-Rex single and double Snap-In Jack Modules have been designed to accept the standard Brand-Rex Snap-In Jacks and are fully compatible with the 'Legrand Mosaic' and our continental UNI style faceplates. PRODUCT CHARACTERISTICS: Dimensions: 45mm x 45mm Depth: 14.75mm Label: White paper with clip in clear cover Body Material: ABS Colour: Off White 14.
Copper Accessories Cat 5e Cross-Connect Cable Management Cat 6 PRODUCT DESCRIPTION: The cable management range compliments the set of Cross-connect components offered by Brand-Rex. The horizontal cable organisers can be supplied with or without legs and also as a 19" rack mounted version. PRODUCT CHARACTERISTICS: Dimensions: Horizontal Cable Organiser with Legs 271.8 x 46.7 x 111.0mm Horizontal Cable Organiser without Legs 214.9 x 44.0 x 64.
Copper Accessories Brand-Rex Copper Components - Consumables and Tools Consumables and Tools PRODUCT DESCRIPTION: Within the standard Brand-Rex product range is a set of standard tools for the safe and efficient termination of copper cables. These tools are available for both LSA and 110 style IDC connectors. Also available is a Brand-Rex Jack Gripper to hold Snap-In-Jacks during termination.
Product Part Number Index Product part number AC6F/FTP-HF1 AC6F/FTP-HF3 AC6JAKFOK2 AC6JAKUOK2 AC6JAKUOK3 AC6PCS020 - x88HB AC6PCS030 - x88HB AC6PCS050 - x88HB AC6PCU020 - x88HB AC6PCU030 - x88HB AC6PCU050 - x88HB AC6S/FTP-HF1 AC6S/FTP-HF3 AC6U-HF1 AC6U-HF3 C3U100PRHF1 C3U25PRHF1 C3U50PRHF1 C5CPNLU254PK2 C5CPNLU254PK8 C5CPNLU256PK2 C5CPNLU504PK2 C5CPNLU504PK8 C5CPNLU506PK2 C6C110110PC010 C6C110110PC015 C6C110110PC020 C6C110110PC030 C6C110110PC040 C6C110110PC050 C6C1104PIT C6C1104PITRH C6C110CB4P C6C110RJ4PC
Product Part Number Index Product part number GPCSLA62UB03 GPCTWOU003 GPF GPF-D GPF-HF1 GPF-HF1-D GPF-HF3 GPF-HF3-D GPS GPS-D GPS-HF1 GPS-HF1-D GPS-HF3 GPS-HF3-D GPU GPU-D GPU-HF1 GPU-HF1-D GPU-HF3 GPU-HF3-D LAUPBXM001 LAUPSTNMSP001 LAUSEC001 LJUPBX001 LJUPSTN001 LJUSEC001 MMCACC110 MMCACCCM001 MMCACCCM002 MMCACCCM003 MMCACCCM004 Page 1.40 1.41 1.32 1.32 1.32 1.32 1.32 1.32 1.33 1.33 1.33 1.33 1.33 1.33 1.31 1.31 1.31 1.31 1.31 1.31 1.50 1.50 1.50 1.50 1.50 1.50 1.58 1.54 1.54 1.54 1.
brand-rex italy via giovanni da udine, 34 20156 milano italy brand-rex portugal lagoas park edifício 8 – piso 0 2740-244 porto salvo portugal tel: +39 02 3809 3271 fax: +39 02 3809 3275 web: www.brand-rex.com tel: +351 21 421 4133 fax: +351 21 421 4135 web: www.brand-rex.com brand-rex spain avenida de la vega, 1 edificio 3. planta 2. oficina 11 28108 alcobendas madrid spain tel: +34 914 905 919 fax: +34 917 889 839 web: www.brand-rex.