Dimensions Guide

Product

Spec Sheet

KEY SPECIFICATION

BRANDGUARD VENTS Inc. 6 Rancho Circle, Lake Forest, CA 92630 T: 949-481-5300 E: info@brandguardvents.com www.BRANDGUARDVENTS.com

SUB BASE FOR DORMER, TURBINE, LOW PROFILE AND/OR OTHER ROOF VENTS Model # SB2011*

*NOT TO BE USED WITH Brandguard Dormer Vents

Sub Base for

Dormer Vents

Model

Size

W x H

Flanges

Available

Flange

Definition

Weight

* To be used with

Dormer, Turbine, or

other Field Vents

SB2011

12” x 12”

Sub Flashing

As Shown

5lbs

BENEFITS:

 Safety vents that are used in areas prone to wildfires, wind driven rain, or

wind driven snow.

 Overlapping Baffle Protection (Patented)

o Air Flows through normally

o Resists the intrusion of Flame and Embers, Wind Driven Rain and

Wind Driven Snow

 WUI Compliant and with California Ch7a Building Code

 Anti -Clogging Overlapping Baffles plus 1/8” mesh on back side of vent

 Prevents Rodent Entry

 20 Year FULL Warranty

 Easy to Install, from inside or outside the attic

STANDARD MATERIALS

ASTM A653/A653M- G90 hot dipped galvanized steel, 26GA

ASTM D9092- mill phosphatized coating for painting. IF BONDERIZED

ASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED

.025 x.025 hot dipped galvanized 23ga wire mesh

PAGE 1
KEY SPECIFICATION Product Spec Sheet SUB BASE FOR DORMER, TURBINE, LOW PROFILE AND/OR OTHER ROOF VENTS Model # SB2011* *NOT TO BE USED WITH Brandguard Dormer Vents Sub Base for Dormer Vents * To be used with Dormer, Turbine, or other Field Vents Model Size WxH Flanges Available Flange Definition Weight SB2011 12” x 12” Sub Flashing As Shown 5lbs BENEFITS:        Safety vents that are used in areas prone to wildfires, wind driven rain, or wind driven snow.
PAGE 2
KEY SPECIFICATION Product Spec Sheet Installation: Install with Dormer, Turbine, Mushroom, or other applicable commodity field vents from either the interior or exterior of the attic. Do NOT install with Brandguard Dormer Vent. Brandguard Dormer Vents can be used with a standard 1/16”-1/8” Mesh Sub Base. EXAMPLES OF INTERIOR ATTIC INSTALLATION: BRANDGUARD VENTS Inc. 6 Rancho Circle, Lake Forest, CA 92630 T: 949-481-5300 E: info@brandguardvents.com www.BRANDGUARDVENTS.