User Manual

INSTALL A T ION(INSTR U C TIONS(
6503 Instructions 2-4-14.Doc Page 4 of 8
23. Remove rear driver’s-side sill plate by lifting it at
front and working your way back with your hands.
24. Lift driver’s side rear seat to expose the under seat
storage compartment. Pull three pushpins out of the
driver’s side rear seat storage compartment using a
Pushpin Removal Tool.
25. Pull back carpeting and remove the body floor plug.
26. Insert the large gray connector end of the supplied
Chassis Harness through the body floor plug hole.
27. Seat grommet affixed to the supplied Chassis
Harness in the body floor plug hole by firmly
pressing it with your fingers.
28. Route the Chassis Harness RCA connector through
the seat riser reinforcement hole.
29. Reinstall carpet and reinstall the three pushpins
removed earlier.