User guide

INSTALLATION INSTRUCTIONS

2000-3851 Instructions 11-13-12.doc Page 1 of 2

Bongiovi Acoustics DPS – A/B Kit

(Kit part number 2000-3851)

Kit Contents:

1 bubble bag containing:

1 – DPS A/B Demo Box

1 – DPS A/B Demo Switch

1 – DPS A/B Demo Harness

These Instructions

Tools Required: (May Vary Depending On Your Vehicle)

None

General Preparation:

1. Park vehicle on level ground and secure with tire chucks.

2. Ensure all radio functions are working properly.

3. For vehicles equipped with automatic transmissions, place shifter in the N (neutral) position

and set parking brake.

KIT COMPONENTS

PAGE 1
INSTALLATION INSTRUCTIONS Bongiovi Acoustics DPS – A/B Kit (Kit part number 2000-3851) Kit Contents: 1 bubble bag containing: 1 – DPS A/B Demo Box 1 – DPS A/B Demo Switch 1 – DPS A/B Demo Harness These Instructions Tools Required: (May Vary Depending On Your Vehicle) None General Preparation: 1. Park vehicle on level ground and secure with tire chucks. 2. Ensure all radio functions are working properly. 3.
PAGE 2
INSTALLATION INSTRUCTIONS Step 4: Test A/B Demo kit function. Turn ignition switch to ON. Step 1: After installing the DPS kit, setting the vehicle specific dip switch settings, and confirming unit function, disconnect DPS Harness from DPS Module. Step 5: With the A/B Demo Box switch in the UP position, the LED is OFF, and the box is in bypass mode allowing on the factory sound system to play. Step 2: Plug DPS Harness into A/B Demo Box.