Owner's Manual
9002-6117.doc-16 Page 1 of 2
3-Input Video Switcher
(Kit # 9002-6117)
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit: Tools & Su
pp
lies Needed:
Video RCA harness
Trigger harness
Circuit board
These instructions
Wire strippers
Wire cutters
Electrical tape
Zip ties
Plastic panel removal tools
Digital Volt Meter / BCM safe test light
Screwdriver
Socket set
Wrench
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com