Owner's Manual

,~
;;:-..
MOTION)
INSTALLATION
INSTRUCTIONS
seamless
vehicle
persona
Hzet
i
on
./
Add-A-Circuit
Addendum
Please
read thoroughly
before starting installation
and check
that
kit
contents are
complete.
Items
added
to
this kit:
Add-a-circuit power
tap
w/
2amp fuse
Safety Precautions:
•
Work in
well
ventilated area
that
is
clear
of
obstructions.
•
Secure
vehicle
with tire chucks in both
front
and rear
of
tires.
•
Turn
vehicle accessories
OFF
and ensure ignition key
is
in
OFF
position.
•
Wear safety goggles and snug fitting
clothes.
•
Use
tools only
for
their
intended purpose and which are in good repair.
• Only
perform this task
if
confidence, skill,
and physical ability permit.
~~'·i••ww~nlna:tl8rii11&Jii1Mt:8M!i1Wllul'lib!fai:ftltl&••m•mm,
1.
The fuse holder/Add-a-circuit
is
an
ATM
style
fuse.
Check
the fuse box
of
the
vehicle
to
see
if
it
has the same style fuses.
2.
If
you have different
style
fuses,
follow
the instructions provided in this kit for power
connections in the vehicle.
3.
If
you have the same
style
fuses,
use
a computer safe test
light
or
Digital voltmeter
to find a
fuse that
is
accessory power.
(The fuse will change from ground when
the
key
is off,
to
12
volts
when the key is turned on).
4.
Remove the fuse and
place
into the open spot on the Add-a-circuit.
5.
Insert the Add-a-circuit in to the fuse box where the fuse was
just
removed from.
6.
Connect
the
black
wire
of
the Freedom
Charge module
to
a
clean solid
ground.
Add-a-circuit
2-25-16
Page
1
of
1