Owner's Manual

ManualsBrandsBrandmotion ManualsCar Audio & VideoSUTV-2010

Installation Instructions - UTV Camera System Page 1/5AR_12_23_20

SummitView™ UTV 1080p Rear Vision System

with High Definition 7″ DVR Monitor

SUTV-2010

Install Time

Product Features

Recommended Tools

Diculty Level

Unobstructed HD View

Eliminates Blind Spots

Records as You Drive

3X Wider View

Seamless Integration

Full Touch Screen

2hr - 3hr

Wrench

Socket SetScrew Driver Panel Removal Tool Zip Ties

Wire Strippers Wire Cutters Electrical Tape

Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE

Summary of content (5 pages)

PAGE 1
SummitView™ UTV 1080p Rear Vision System with High Definition 7″ DVR Monitor SUTV-2010 Recommended Tools Difficulty Level Wrench Wire Strippers Wire Cutters Electrical Tape Screw Driver Panel Removal Tool Zip Ties Socket Set Install Time 2hr - 3hr Product Features 3X Wider View Unobstructed HD View Eliminates Blind Spots Full Touch Screen Records as You Drive Seamless Integration Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE AR_12_23_20 Installat
PAGE 2
Vehicle Application: Utility Task Vehicles Part Number: SUTV-2010 Kit Contents Kit A Components for installing the HD Monitor x1 HD Monitor x1 Power Harness x1 Mounting Plate Kit B Components for installing the Off-Road Camera x1 HD Cameras AR_12_23_20 x3 Mounting Rings x1 Video/Power Harness Installation Instructions - UTV Camera System Page 2/5
PAGE 3
Vehicle Application: Utility Task Vehicles Part Number: SUTV-2010 Camera Installation Part 1 Mounting hardware installation 1. Remove the 4 Allen screws that are located on the sides of the camera and remove the camera mounting bracket and visor. 2. Find an appropriate place to mount the camera. Line up the foot bracket to ensure that there is enough space to attach the camera to the body. 3. Attach the mounting foot using either selftapping screws or a bolt and nut. 4.
PAGE 4
Vehicle Application: Utility Task Vehicles Part Number: SUTV-2010 Monitor Installation and Wiring Part 1 Roll Bar Mount 1. Choose the proper size roll bar mounting ring. 2. Use supplied foam and apply to the inner ring of the bracket. 3. Place mounting ring on desired location. A fair amount of force might be necessary. 4. Attach the neck of the mounting bracket to the mounting ring, and tighten the cross bolt. a).
PAGE 5
Vehicle Application: Utility Task Vehicles Part Number: SUTV-2010 FAQ Section 1. How do I stop the monitor mount from moving on the roll cage? We recommend adding a strip of electrical tape to the mounting plate in order to create a tighter fit. 2. How do I turn off the monitor? Hold down the power button for 3 seconds. 3. Is the monitor waterproof? The cameras are rated for IP 69K, however the montior is not waterproof.