Brandt User Manual Brandt Window air conditioner Model B07EG, B09EG, B12EG, B18EG
CONTENTS Features 1 Air Conditioner Content 2 Installation 4 Operations 6 Air Conditioner Cares 9 Precautions Procedures 10 Trouble Shooting 11
FEATURES Features Cool / Fan / Dry /OPTI COOL mode Sleep Mode 24 hrs Timer Power Saver mode OPTI COOL mode Filter Clean indicator Temperature Setting Low / Medium / High / Auto Fan Speed Setting Auto Swing Brandt 1
AIR CONDITIONER CONTENT A) AIR CONDITIONER 1. Front Panel 2. Air filter 3. Frame 4. Cabinet 5. Air Inlet cutouts (Outdoor side) 6. Cold Air Outlet 7. Electronic Control Panel 8.
B) Control panel LIGHT TOUCH MASTER 1. Power key 2. Mode key (Cool/Dry/Fan/OPTI COOL) 3. Temperature Setting key 4. 3 Fan Speed Setting key 5. OPTI COOL key 6. Filter Clean key 7. Power Save key 8. Auto Swing key 9. Timer key 10.
INSTALLATION Please ensure that you get only the authorised service dealer of Gilman Home Appliance to install the air conditioner for you, as many factors need to be considered for the efficient performance of your Window Air conditioner. Locational Preferences To get the best results, Install the window air conditioner at window sill level. Align the unit to the centre of the cabinet before fixing the front grill, to ensure smooth operation of the control panel.
1m Outside the room, ensure that the hot air from the rear end of the unit discharges freely into the open atmosphere. A minimum clearance of 30 cms on the two sides and 1.0 mt at the rear of the external portion of your air conditioner, is advisable. Select a location that supports the weight of your air conditioner. Also there should be no vibration that results in increased noise. While installation of the unit into the wall please ensure the air inlet cutouts are not blocked.
OPERATIONS Your air conditioner will switch ON with previous settings of the controller. The set temperature is then displayed on the LCD screen. Switching ON your Air Conditioner (from control panel) Press the "ON/OFF" button on the control panel of the air conditioner. Your air conditioner will start with the previous settings of the controller. The set temperature is then displayed on the control panel screen.
MASTER MODES ON THE CONTROL PANEL By default, the display will always show the setting temperature. You can set the temperature by pressing Temp Up/Down Button from 16 0C to 30 0C. Once you set the temperature, wait for 5 seconds. The display will blink for five seconds, after which the new ambient set temperature gets set. 1. "ON/OFF key Power button to ON/OFF the AC. 2. "Mode key (Cool/Dry/Fan/OPTI COOL) Toggles between Cool/Dry/Fan/OPTI COOL modes. 3. "Temp/Timer key Adjust the Temperature setting.
ADVANCED LED DISPLAY - CONTROL PANEL COOL FILTER CLEAN DRY POWER SAVER FAN SWING AUTO TIMER SLEEP OPTI COOL LO MED HI FAN 6. "FILTER CLEAN" key This is remind you to clean the filter, this will increase the efficiency of the machine. After completion of 260 hours running of fan motor, filternet indicator will glow on, it will remind you to clean the filter.
AIR CONDITIONER CARES Your air conditioner continuously circulates the air in your room through a dust filter. This filter requires periodic cleaning. A clogged filter reduces the efficiency of your air conditioner dramatically. Please clean the filter as follows: 1. Remove filter: Press the two inside Push Push buttons simultaneously to open the front grill, the pull the filter by opening the front grill, as shown in the figure below. Press Here simultaneously Front Grill Filter 2.
PRECAUTIONS PROCEDURES Notice: Choose the right temperature to avoid over cooling. Open the vent in the unit to expel smoke or foul smell. Ventilate the room occasionally. Don't leave the doors and windows open when the airconditioner is on. Don't use hot water to clean your front grill Don't use scouring powder, harsh soaps, wax or polish on the grill. Don't switch on the airconditioner immediately after switching it off.Wait for 3 minutes before restarting.
TROUBLE SHOOTING CHART Symptoms Unit does not start Units does not cool (Even after the normal Time Delay of approx.
: Please record the following information : Model Serial No. Name of distributor Date of purchase The manufacturer reserves the right to make any technical modifications due to product improvement. No prior notice will be given. If you have any enquiry, please contact our after-sales department and forgive for any inconvenient. All information is subjected to English version. 232 2/F.