Operation Manual

LOCATIONOFCONTROL

1. POWER
2. Display 
3. VOLUME/AL1
4. VLUME/AL2
5. FMaerial 
6. TUNING/HR
7. TUNING/MIN
8. SLEEP
9. SET
10. SNOOZE
11. BAND
12. MEM
13. Batterycover



DISPLAY


14. Alarm1buzzerindicator
15. Alarm1radioindicator
16. Alarm2buzzerindicator
17. Alarm2radioindicator


BATTERYBACKUP
Theclock,alarmandpresetstationssettingscanbeprotectedagainstACpowerfailurewiththe
batteriesforashortperiodoftime.Ifnobackupbatteriesareinstalledorthepowerfailureisprolonged,
youwillneedtosettheclockagain.

STANDBYMODE
Placetheunitonaflatstablesurfaceandplugthepowercordintothemainssocket.
 Theunitisinstandbymodeand“0:00”willflashonthedisplay.

SETTINGTHECLOCK 
1. Instandbymode,pressandholdSETuntilthedisplayflashes.
2. RepeatedlypressHRtosetthehours.
3. RepeatedlypressMINtosettheminutes.
4. PressSETtoconfirm.
 Thehourandminutedigitswillstopflashing.

Downloaded from www.vandenborre.be