Specification

This specification and all information contained herein is the confidential and exclusive property of
BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft.
This specification must be returned to BrassCraft if requested.
400.206 1-**KA Copper Faucet Riser - Sweat Nosepiece REV 01/11 2011 Brass-Craft Mfg.
Product Submittal Form
1-**KA Copper Faucet Riser – Sweat Nosepiece
Use: For use in potable water distribution systems in accessible locations only.
Design Features:
 One-piece construction
 Cut-to-Length for clean, professional installation
 100% Compliant to California and Vermont “low-lead” requirements
Operating Specifications:
Temperature: 40°- 180°F
Pressure: 125 psi maximum
Tubing Diameter: 0.38” O.D.
MATERIAL SPECIFICATIONS
Tube
C12200 copper per ASTM B-68
Part Listing:
1-12KA C 3/8” ID Sweat x 3/8” OD Tube x 11-1/2” Length, chrome plated
1-12KA R 3/8” ID Sweat x 3/8” OD Tube x 11-1/2” Length, rough finish
1-12KA RBT 3/8” ID Sweat x 3/8” OD Tube x 11-1/2” Length, rough finish,
plain label, bulk
1-15KA R 3/8” ID Sweat x 3/8” OD Tube x 14-1/2” Length, rough finish
1-20KA C 3/8” ID Sweat x 3/8” OD Tube x 19-1/2” Length, chrome plated
1-20KA R 3/8” ID Sweat x 3/8” OD Tube x 19-1/2” Length, rough finish
Listings & Certifications:
 IAPMO listed to ASME A112.18.1-2005 / CSA B125.1-2005 (File # 0645)
 CSA approved to California Health & Safety Code 116875 and Vermont Bill S.152
(Project # 2174785)
For Residential and Commercial Applications
PART DIMENSIONS (Inches)
Model
DIM. A
DIA. B
DIM. C
1-12KA
11.53
3/8
.62
1-15KA
14.53
3/8
.62
1-20KA
19.53
3/8
.62
B
A
C
JobName

Engineer/Architect

JobLocation

Wholesaler

SubmittalDate

Contractor
