Specification

ManualsBrandsBrassCraft ManualsPlumbing Product3/8 in. O.D. x 15 in. Copper Faucet Riser with 3/8 in. O.D. Compression Nosepiece in Chrome

This specification and all information contained herein is the confidential and exclusive property of

BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft.

This specification must be returned to BrassCraft if requested.

400.204 1-**KC/ 3-**KC Copper Faucet Riser - Compr Nosepiece REV 01/11 2011 Brass-Craft Mfg.

Product Submittal Form

1-**KC/ 3-**KC Copper Faucet Riser – Compression Nosepiece

Use: For use in potable water distribution systems in accessible locations only.

Design Features:

 One-piece construction

 Cut-to-Length for clean, professional installation

 100% Compliant to California and Vermont “low-lead” requirements

Operating Specifications:

Temperature: 40°- 180°F

Pressure: 125 psi maximum

Tubing Diameter: 0.38” O.D. or 0.50" O.D.

MATERIAL SPECIFICATIONS

Tube

C12200 copper per ASTM B-68

Compression Nut

C36000 brass

Compression Sleeve

C36000 brass

Part Listing:

1-12KC C 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, chrome plated

1-12KC CBT 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, chrome plated, bulk

1-12KC C2 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, chrome plated, 2 per pack

1-12KC R 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, rough finish

1-12KC RBT 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, rough finish, bulk

1-12KC R2 3/8” Compression x 3/8” OD Tube x 11-1/2” Length, rough finish, 2 per pack

1-15KC C 3/8” Compression x 3/8” OD Tube x 14-1/2” Length, chrome plated

1-15KC R 3/8” Compression x 3/8” OD Tube x 14-1/2” Length, rough finish

1-20KC C 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, chrome plated

1-20KC CBT 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, chrome plated, bulk

1-20KC CF 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, chrome plated, flag label

1-20KC C2 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, chrome plated, 2 per pack

1-20KC R 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, rough finish

1-20KC R2 3/8” Compression x 3/8” OD Tube x 19-1/2” Length, rough finish, 2 per pack

1-30KC C 3/8” Compression x 3/8” OD Tube x 29-1/2” Length, chrome plated

3-12KC C 1/2" Compression x 1/2” OD Tube x 11-1/2” Length, chrome plated

For Residential and Commercial Applications

JobName



Engineer/Architect



JobLocation



Wholesaler



SubmittalDate



Contractor



Summary of content (2 pages)

PAGE 1
Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor 1-**KC/ 3-**KC Use: Copper Faucet Riser – Compression Nosepiece For use in potable water distribution systems in accessible locations only. Design Features: One-piece construction  Cut-to-Length for clean, professional installation  100% Compliant to California and Vermont “low-lead” requirements  Operating Specifications: Temperature: 40°- 180°F Pressure: 125 psi maximum Tubing Diameter: 0.38” O.D. or 0.50" O.D.
PAGE 2
Copper Faucet Riser – Compression Nosepiece B A PART DIMENSIONS (Inches) Model DIM. A DIA. B 1-12KC 11.56 3/8 1-15KC 14.56 3/8 1-20KC 19.56 3/8 1-30KC 29.56 3/8 3-12KC 12.56 1/2 Listings & Certifications:  IAPMO listed to ASME A112.18.1–2005 / CSA B125.1-2005 (File # 0645)  CSA approved to California Health & Safety Code 116875 and Vermont Bill S.