Installation Guide

Job Name Engineer / Architect

Job Location Wholesaler

Submittal Date Contractor

This specification and all information contained herein is the confidential and exclusive property of

Brasscraft Manufacturing Co., and shall not be disclosed to others without the written consent of

Brasscraft Mfg. Co. This specification must be returned to Brasscraft Mfg. Co. if requested.

Product Submittal Form

B1-**KC Speedi Plumb® PLUS Braided Faucet Connectors -

Compression Inlet x KC Nosepiece Outlet

Use: For use in potable water distribution systems in accessible locations only.

Design Features:

▪ Engineered polymer braided fibers bend freely without kinking or

crimping

▪ Reinforced PVC inner hose provides added durability

▪ Rubber washers provide a large pliable sealing surface and ensure a long

lasting water-tight connection

▪

Operating Specifications:

Temperature: 40°- 160° F, intermittent to 180° F

Pressure: 125 PSI maximum

Tubing Diameter: 0.300” ID (0.550” OD)

CONNECTOR MATERIAL SPECIFICATIONS

Inner Hose

Reinforced PVC

Braiding

PVC coated yarn

Barb

Brass

Ferrule

Stainless steel

Washer

Rubber

Compression Ring

Brass

Compression Nut

Brass, plated

KC Barb

Brass, plated

Part Listing:

B1-12KC F 3/8” compression x 3/8" OD compression x 12” length

B1-16KC F 3/8” compression x 3/8" OD compression x 16” length

B1-20KC F 3/8” compression x 3/8" OD compression x 20” length

For Residential and Commercial Applications

PAGE 1
Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor B1-**KC Speedi Plumb® PLUS Braided Faucet Connectors Compression Inlet x KC Nosepiece Outlet Use: For use in potable water distribution systems in accessible locations only.
PAGE 2
A PART DIMENSIONS (Inches) Model DIM. A B1-12KC 12.0 / 13.0 B1-16KC 16.0 / 17.0 B1-20KC 20.0 / 21.0 Product Submittal Form B1-KC Speedi Plumb® PLUS Braided Faucet Connectors Compression Inlet x KC Nosepiece Outlet Listings & Certifications: ▪ ▪ ▪ IAPMO listed to ASME A112.18.6 / CSA B125.6 IAPMO listed to NSF 372 for Low-Lead Compliance IAPMO listed to NSF 61/9 This specification and all information contained herein is the confidential and exclusive property of Brasscraft Manufacturing Co.