Specification

Job Name Engineer / Architect
Job Location Wholesaler
Submittal Date Contractor
This specification and all information contained herein is the confidential and exclusive property of
Brasscraft Manufacturing Co., and shall not be disclosed to others without the written consent of
Brasscraft Mfg. Co. This specification must be returned to Brasscraft Mfg. Co. if requested.
400.335 B1/B2/B3 SPP Braided Faucet Connector - Compression Inlet REV 07/19 ©2019 Brasscraft Manufacturing Company
Product Submittal Form
B1-**A/ B2-**A/ B3-**A Speedi Plumb® PLUS Braided Faucet
Connector - Compression Inlet
Use: For use in potable water distribution systems in accessible locations only.
Design Features:
▪ Engineered polymer braided fibers bend freely without kinking or
crimping
▪ Reinforced PVC inner hose provides added durability
▪ Rubber washers provide a large pliable sealing surface and ensure a long
lasting water-tight connection
▪
Operating Specifications:
Temperature: 40°- 160° F, intermittent to 180° F
Pressure: 125 PSI maximum
Tubing Diameter: 0.300” ID (0.550” OD)
CONNECTOR MATERIAL SPECIFICATIONS
Inner Hose
Reinforced PVC
Braiding
PVC coated yarn
Barb
Brass
Ferrule
Stainless steel
Nut
Brass, plated or polypropylene
Washer
Rubber
Part Listing:
B1-12A F 3/8” compression x 1/2” FIP* x 12” length
B1-16A F 3/8” compression x 1/2” FIP* x 16” length
B1-20A F 3/8” compression x 1/2” FIP* x 20” length
B1-20A P8 3/8” compression x 1/2” FIP* x 20” length, bagged, 8-pack
B1-20AU D 3/8” compression x 1/2” FIP* x 20” length connector with 1/2” OD compression &
1/2” iron pipe valve adaptors, and washers, carded
B1-24A F 3/8” compression x 1/2” FIP* x 24” length
B1-30A F 3/8” compression x 1/2” FIP* x 30” length
B1-36A F 3/8” compression x 1/2” FIP* x 36” length
B1-48A F 3/8” compression x 1/2” FIP* x 48” length
B1-60A F 3/8” compression x 1/2” FIP* x 60” length
For Residential and Commercial Applications