Cable Drum Machine Operation Manual BC1020 Used For: Sinks, Showers and Tub Drains Cleans 3/4" to 3" lines up to 25' (Not for roots) READ THIS OPERATION MANUAL CAREFULLY BEFORE USING THIS PRODUCT. FAILURE TO UNDERSTAND AND FOLLOW THE CONTENTS OF THIS MANUAL MAY RESULT IN ELECTRICAL SHOCK, FIRE, AND/OR SERIOUS PERSONAL INJURY OR DEATH. KEEP THESE INSTR UCTIONS IN A SAFE PLACE FOR FUTURE USE OR WHEN LOANING OR SELLING THE PRODUCT.
SAFETY SYMBOLS & SIGNAL WORD Safety Symbols & Signal Words/ In this Operation Manual and on the product, safety symbols and signal words are used to communicate important safety information. This section is provided to improve understanding of these signal words and symbols. • This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury. Save all warnings and instructions for future reference. • The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery operated (cordless) power tool. • Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. • Maintain power tools.
grounded outlet. To test the GFCI provided, push the test button in, the indicator light should go off. Restart by pushing the reset button in. If the indicator light goes on, the GFCI is functioning properly. If it is not working properly, unplug the cord and do not use the machine untill it has been correctly fixed. 1 1 • Move the FOR/OFF/REV switch to the FOR position. Slowly press the foot switch and note the direction of rotation of the drum.
Fingers or other body parts can be caught in rotating parts and crush. Do not wear loose clothing, neck ties, unbuttoned jackets, rings, watches or jewelry and always tie back long hair. This will help reduce the risk of entanglement with moving parts. This machine has manual cable feed and it does NOT automatically extend or retract the cable into the machine. Cable MUST be fed by hand. You will use the machine to clear obstructions, return to hand feeding the cable in between clogs or joints. 1.
MACHINE MAINTENANCE REPAIRING YOUR DRUM MACHINE Cables General maintenance and other tasks detailed in this manual, such as the replacement of the cable or a damaged belt guard can be done by a qualified owner. Other servicing repairs, such as the replacement of a defective motor switch, must only be done by Brasscraft. Please contact BrassCraft Customer Service at 877-272-7755.
Manufacturer assumes no responsibility for failure due to improper use. ©2019 Brasscraft Manufacturing Company, Novi, MI 48375-5331 U.S.A. All Rights Reserved. www.brasscraft.com Made in China to Brasscraft Mfg. Co. specifications. BrassCraft® brand is a trademark of Brasscraft Mfg. Co. El fabricante no asume ninguna responsabilidad si la uso no se hace de acuerdo al instructivo. Todos los Derechos Reservados. Hecho en China bajo las especificaciónes de Brasscraft Mfg. Co.