Submittal Sheet

This specification and all information contained herein is the confidential and exclusive property of
BrassCraft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft
Mfg. This specification must be returned to BrassCraft Mfg. if requested.
300.35 TBV Series Gas Ball Valves - FIP x FIP REV 06/14 2014 BrassCraft Mfg.
Product Submittal Form
TBV Series Gas Ball Valve – Female Iron Pipe x Female Iron Pipe
Use: For use with natural, manufactured, mixed, liquefied-petroleum (LP) gas, and LP gas-air mixtures.
Note: The National Fuel Gas Code requires a gas shut-off valve installed upstream, within “easy reach” or 6 feet
of the gas appliance
Design Features:
 Heavy duty, forged brass body eliminates pinhole leaks commonly associated with cast products
 Blow-out proof stem is assembled from the inside with double o-rings for reliable performance
 PTFE seat rings for longer life and consistent performance
 Right-sized handles ensure on/off operation even in tight installations
 Quarter turn operation for easy on/off flow
control
 Approved for indoor/outdoor use
 100% Leak tested
Operating Specifications:
Temperature: -40- 150F
Pressure: 5 PSI maximum
Part Listing:
TBV8 1/2” FIP x 1/2” FIP
TBV12 3/4” FIP x 3/4” FIP
TBV16 1” FIP x 1” FIP
Country of Origin:
Made in Italy
Listings and Certifications:
 CSA listed to ANSI Z21.15 / CSA 9.1, ANSI / ASME B16.44, and CGA CR91-002
For Residential and Commercial Applications
VALVE MATERIAL SPECIFICATIONS
Body
Forged brass
Retainer
Forged brass
Ball
Brass, chrome plated
Seat
PTFE
Stem
Brass
O-rings
High-temperature rubber
Handle
Aluminum
Screw
Steel, zinc plated
PART SPECIFICATIONS (Inches)
Model
DIM. A
DIM. B
TBV8
1.43
1.94
TBV12
1.68
2.33
TBV16
1.75
2.50
A
B
JobName

Engineer/Architect

JobLocation

Wholesaler

SubmittalDate

Contractor
