Use and Care Manual

ManualsBrandsBrassCraft ManualsPlumbing3/4 in. FIP x 3/4 in. FIP x 15 in. Copper Water Heater Connector (7/8 in. O.D.)

Job Name Engineer / Architect

Job Location Wholesaler

Submittal Date Contractor

This specification and all information contained herein is the confidential and exclusive property of Brass-

Craft Manufacturing, and shall not be disclosed to others without the written consent of BrassCraft Mfg.

This specification must be returned to BrassCraft Mfg if requested.

300.21 WB00/ WB10 Copper Water Heater Connectors REV 10/12 2012 BrassCraft Mfg.

Product Submittal Form

WB00/ WB10 7/8” OD Copper Water Heater Connectors –

Female Iron Pipe x Female Iron Pipe

Use: For use in exposed locations only to connect water heaters and other water connected devices to the

water supply

Design Features:

 Superior galvanic corrosion resistance. Patented internal dielectric sleeve

effectively isolates dissimilar metals within the waterway to prevent galvanic

corrosion

 No dielectric union needed with installation. Dielectric is built-in to the design

of the connector

 Less torque to seal against the pliable rubber washer, especially on rough nipple

surfaces

 Longer connector nuts allow a greater number of thread-to-thread contacts

and a better seal

 100% Compliant (WB00 only)

Operating Specifications:

Temperature: 40° - 180° F (NSF61 maximum 82° C)

Pressure: water pressures up to 125 PSI maximum

CONNECTOR MATERIAL SPECIFICATIONS

Tubing

Copper

Dielectric Sleeve

Polypropylene

Nut

Brass

End Fitting

Brass

Washer

Rubber

Part Listing:

WB00-12N 7/8” OD X 12” connector with 3/4” FIP x 3/4” FIP end fittings

WB00-15N 7/8” OD X 15” connector with 3/4” FIP x 3/4” FIP end fittings

WB00-18N 7/8” OD X 18” connector with 3/4” FIP x 3/4” FIP end fittings

WB00-24N 7/8” OD X 24” connector with 3/4” FIP x 3/4” FIP end fittings

WB00-30N 7/8” OD X 30” connector with 3/4” FIP x 3/4” FIP end fittings

WB00-36N 7/8” OD X 36” connector with 3/4” FIP x 3/4” FIP end fittings

WB10-18N 7/8” OD X 18” connector with 1” FIP x 3/4” FIP end fittings

For Residential and Commercial Applications

Summary of content (2 pages)

PAGE 1
Job Name Engineer / Architect Job Location Wholesaler Submittal Date Contractor WB00/ WB10 7/8” OD Copper Water Heater Connectors – Female Iron Pipe x Female Iron Pipe Use: For use in exposed locations only to connect water heaters and other water connected devices to the water supply Design Features:  Superior galvanic corrosion resistance.
PAGE 2
WB00 Series A WB10 Series Model Dim. WB00 WB10 A A PART DIMENSIONS ( Inches ) Connector Length – Nut by Nut (±.31) 12” 15” 18” 24” 30” 36” 12.31 15.31 18.31 24.31 30.31 36.31 ----- ----- 18.31 ----- ----- ----- Listings & Certifications (WB00 Series only):  IAPMO listed to ASME A112.18.