User manual

Getting Started

1) Insert the connector plug of the mains cable into the DC In socket, and then plug

the other end into a suitable power outlet.

2) Turn on the device by holding the power button for 3 seconds.

3) The screen will show the startup logo.

4) Wait for about 30 seconds, then the main interface will be shown on the screen.

Power On/Off

1) Power on: When the device is powered off, turn it on by holding the power button

for 3 seconds.

2) Power off: When the device is powered on, hold the power button for 3 seconds

and tap “Power off” to turn it off.

3) Short press the power button to put the device into sleep mode or to turn it on

again if it is on standby.