Scouting Cam BLACK400phone Instruction Manual BRAUN PHOTO TECHNIK GmbH Klingenhofstraße 72 90411 Nürnberg www.braun-phototechnik.
Inhalt 1. Caution ............................................................................................................... 3 2. Instructions ........................................................................................................ 4 2.1 Camera Body Interface ................................................................................. 5 2.2 Camera components and features ................................................................ 5 2.3 Shooting Information Display ............
4.3 File Numbering ........................................................................................... 22 4.4 Firmware Upgrade ...................................................................................... 22 Appendix: Technical Specifications.................................................................... 24 1. Caution 1) Do not drop, knock or shake the camera. 2) The working voltage of the camera is 7.5 to 9.0 V. The camera is supplied by rechargeable lithium battery.
Attention! Legal and privacy protection Please inform yourself carefully about the legal regulations in your country concerning to data protection, personal identification, copyright, duty of notification and privacy laws before using this device. The Braun Photo Technik GmbH assumes no liability for violations against the Federal Data Protection Act and other legal regulations! Privacy of individuals must be preserved. Prepare your camera only at places where this is guaranteed.
movement of human (or animals) in a certain region of interested (ROI) monitored by a high sensitive Passive Infrared (PIR) motion sensor, and then automatically captures high quality pictures (up to 12MP) or records 1080p HD video clips (WVGA or QVGA). At sunrise the unit begins to take color photos and video until there is insufficient light (dusk) when it begins to take infrared (monochrome) photos and video. Easy to use, 2.5-inch colour LCD display, supports MMS/email via GSM network. 2.
1) 2.5 inch Color LCD Display 2) Power Switch 3) Distance Switch 4) Menu Switch 5) SHUTTER Switch 6) Select Switch 7) SD-Card Slot 8) USB Connector 9) TV Out Connector 10) SIM-Card Slot 11) Battery Compartment 2.3 Shooting Information Display When the camera is turned on (the power switch is slided to TEST position), the shooting information will be displayed in the monitor.
2.4 MMS Function This camera can send pictures instantly to your mobile device via the GSM network. You will be alerted only when something has happened; for sending an MMS via the GSM network you need to make the settings in the software first. Review the related information in Chapter 4.1.4 Settings Menu “MMS”. SIM card icon: There are two SIM card icons. means that the SIM card is inserted and it works properly. means that the network signal in your area is very good.
the write-protect switch of the SD-card is on the “write” position. When use MMS/e-mail function, be sure to insert SIM-card into the SIM-card slot with angle in the lower left. 3.3 Power on and enter into the ON Mode Before switching on, please pay attention to the following: 1. Avoid temperature and motion disturbances that could be construed as animals or humans such as trees that are exposed to direct sunlight for much of the day or any other heat source. These may cause false triggers 2.
3.4.4 Send MMS The MMS function will be available after MMS is set to “ON” position. 3.5 Power Off Slide the power switch to OFF position to power off the camera. Please note that even in the OFF mode, the camera still consumes certain power at µA level. Therefore, please remove the battery if the camera will not be used for a long time. 4. Advanced Operations The camera has three basic operation modes (Power switch): 1) OFF mode: Power switch is at OFF position (Right).
4.1.1 Photo Setting 4.1.
4.1.
4.1.
4.1.5 SMTP Menu 4.1.6 Fix the setting on the computer You can fix Camera, MMS or SMTP setting on the computer. Run the MMSCONFIG.exe file from MMSCONFIG folder on the CD. Note: Please move all the files in the root directory of MMSCONFIG folder to keep the setting available.
There are following windows: 1). Fix Camera Setting on PC Click on Camera model BLACK400phone, the following interface is displayed: Fix the camera setting based on your need.
Interval 1/5/10/30 sec/min Waiting time between images Multi 1/3/6/9 Number of photos taken every time ISO 100,200,400 The camera exposure level Video Resolution 1080P, 720P, WVGA, QVGA Video size Video Length 10S, 30S, 60S, 90S The length of video Voice On, Off If On, Video sound is recorded System Mode Camera, video, camera&video Taking picture, video, picture and video Language English, Francais, Deutsch and Camera menu language so on TV Mode NTSC, PAL TV play mode Date/Time 0
Select how to set up MMS Mode: Auto or Manual. 1. Auto MMS MODE Select Country and Operator. Please pay attention to your costs per MMS! Then add phone number or email address for receiving pictures. 2. Manual MMS MODE Contact your mobile phone network operator for all the required information: APN, MMSC, IP and Port and enter. Please pay attention to your costs per MMS! For receiving pictures, please add phone number or email address.
3). Set up SMTP Function on PC Click on SMTP, the following interface is displayed: 1. Auto MMS MODE Select Country and Operator. Select sending email provider, address and password. Please pay attention to your costs per MMS! Then add another email address for receiving the pictures. 2. Manual MMS MODE Contact your mobile phone network operator for all the required information: APN, MMSC, IP and Port and enter. Please pay attention to your costs per MMS! Then add sending email address and password.
Please pay attention that “MMS Function” must be in “OFF” mode.
make sure that you have made a backup of important data. a) Press MENU to display the setting MENU. b) Press RIGHT to select SYSTEM setting. c) Press DOWN to select FORMAT. d) Press RIGHT to select SD Card. e) Press down the select switch to choose Enter to enter into submenu. f) Press down to select OK. OK will be highlighted. g) Press OK to start formatting the SD-card. During formatting, the display screen will show a message “Please Wait”. h) Press MENU to cancel setting and return to info display. 4.1.
return to info display. f) Press MENU to cancel setting and return to info display. 4.1.14 Set Multi This parameter affects the number of pictures taken for each triggering in the camera mode. It has four values: “1 Photo”, “3 Photos” “6 Photos” and “9 photos”. Its default value is “1 Photo”. The following shows how to set photo burst to 3 Photos, provided that the previous option is 1 Photo: a) Press MENU to display the setting menu. b) Press DOWN to select Multi. c) Press RIGHT to select 3 pictures.
b) c) d) e) Press DOWN to select Interval. Press RIGHT to enter in to the interval setting. Press DOWN to select 1 minute. Press down the select switch to save the current setting, then press MENU to return to info display. f) Press MENU to cancel setting and return to info display. 4.1.18 Set Timer This parameter defines a certain time lapse in a day when the Camera can be triggered. In the rest of the time the device is shut off.
display. f) The LCD screen will prompt to enter the password next time you switch on the camera. g) Press MENU to cancel setting and return to previous menu. 4.2 Playback In playback mode, images or videos can be viewed, deleted. The images and videos can be viewed on: LCD screen on camera and TV monitor which connect to camera with TV cable. For simplicity, operations with PC won’t be introduced here. 4.2.1 Viewing Photo or Video a) Switch to TEST mode and enter into info display.
1. 2. 3. 4. 5. Unzip the update file. Copy the FW18NA.bin to SD card. Insert the SD card into the camera. Power on the camera (Test Mode). The camera will read it and update itself automatically. When updating the camera, its screen is black. 6. The screen will light on after being finished 7. Plug out the SD card, then insert it into pc, delete the FW18NA.bin in the SD card.(If you don't do this, the camera will enter update mode when power on again). 8. Insert the SD card into the camera.
Appendix: Technical Specifications Image sensor 5 Mega Pixel Color CMOS (12 MP interpolated) Memory SD Card ( up to 32GB) Lens F=3.1; FOV=60 Size 160mm x 120mm x 50 mm IR Filter Full Automatic IR Filter TFT Display 2.5’’ Color-TFT LCD PIR sensor: Triggering sensitivity High/Normal/Low PIR sensor: angle of detection 60 ° IR LEDs Black 54 LEDs/ invisible 940nm PIR Sensing Distance 82ft/25 meters Max Night Vision/Lighting Distance 64ft/20 meters Trigger Time 0.