5” digital photo frame DigiFrame 1550 Operating Instructions
Contents 1 Product Introduction .................................................................... 3 2 Package Contents....................................................................... 3 3 Features ...................................................................................... 3 4 Specifications .............................................................................. 4 5 Controls and Slots.......................................................................
1 Product Introduction As a tool for media display, DigiFrame 1550 cannot only be used in offices and private homes, but also in department stores, schools, banks, conference centres, museums or libraries for commercial purposes. 2 Package Contents Before using the DigiFrame 1550, be sure to check that the package contains all accessories.
USB host function (supports USB flash card). Supports memory cards of the following formats: CF (Compact Flash) MD (Micro Drive) MS (Memory Stick) SD (Secure Digital) MMC (Multi Media Card) SM (Smart Media) XD (XD Picture Card) 4 Specifications Dimensions Display area Resolution Colors Contrast angle Viewing angle Input voltage Low energy mode Operating temperature Net weight Media Built-in memory Card 380 mm x 295 mm x 50 mm 304 mm x 228 mm, 15’’ diagonally 1024 x 768 pixel 16.
Photo functions 1. Rotating, zooming, repeating 2. Auto slideshow 3. Slideshow with background MP3 music 4. Displaying file name, size, resolution, date 5. Interval time setup 6. Transition setup 7. Play/Stop/Pause Music functions 1. Play/Stop/Pause 2. Volume control 3. Mute function 4. Repeat 5. Displaying file type, total time, date Video functions 1. Play/Stop/Pause 2. Volume control 3. Mute function 4. Zooming 5. Displaying file information, time, date Accessories 1. Remote control 2. AC adapter 3.
5 Controls and Slots DigiFrame 1550 Operating Instructions 6
6 Photo Frame Side Buttons OK: Confirm selection. MENU: Show screen menu/select menu option after using up or down arrow button. CONTRAST: Use arrow to change contrast. BRIGHTNESS: Use arrow to change brightness. IMAGE SETTING: Define image setting. COLOR SETTING: Define color setting. OSD SETTING: Set language, define OSD position. RESET: Reset frame to stored basic settings. Arrows: Move up and down. Power: Power on/off.
7 Setting up the DigiFrame 1550 Mount the stand to the frame. Insert a memory card (you can also insert a memory card after switching on). Connect the frame to a power source. To switch on the frame, press the On/Off button on the right side of the frame. When a memory card is inserted, the frame will start in slideshow mode (unless files are stored in a folder).
8 Remote Control Button POWER SETUP DISPLAY CARD SELECTION MUSIC PHOTO MOVIE FILE ROTATE ZOOM REPEAT SLIDESHOW REW FF PREV NEXT + (VOLUME) — (VOLUME) MUTE EFFECT SLIDE INTERVAL PLAY/PAUSE STOP Description Turn the frame on or off Open menu for changing settings Display file information of selected file Choose the desired memory card Go to and display music files Go to and display photo files Go to and display movie files Display library (all files and folders) Rotate photo 90 degrees clockwise on s
9 Downloading Files from Computer to Memory Card The DigiFrame 1550 requires you to insert a memory card with photo, music or video files on it. You can store photo, movie and music files on the same card. 1. Download the files from your digital camera or memory card to your computer. If you download pictures directly from your digital camera to your computer, connect the camera to the computer via a USB port.
File names You can simply name the files Slide 1, Slide 2 etc. or use a similar format. For the file list, the DigiFrame 1550 reads the files in alphanumerical order. 12 Folders in Your Memory Cards When the memory card contains folders, automatic slideshow does not start unless the photos are outside the folders. If you have multiple folders, you have to choose a folder with the remote control and choose a picture in the folder to start the slideshow.
14 Recommended Memory Card Size The recommended size of memory cards for the DigiFrame 1550 is 2 GB and lower. 4 GB with very high resolution pictures may cause memory problems on the screen while playing slideshows. 15 Supported File Formats A. Photo: Two JPEG formats (baseline JPEG and progressive JPEG) For baseline JPEG, the maximum picture resolution is 5120 x 3840, for progressive JPEG, it is 2048 x 1536. If you want to save files from MS Power Point, use the JPEG interchange format.
17 Replacing Remote Control Battery 1. Pull out the battery compartment from the remote control. 2. Remove the battery. 3. Insert a new battery. Pay attention to correct polarity (+/-). 4. Insert the battery compartment again. Notes: 1. Use CR2025 V3 batteries only. 2. Remove the battery when not using the frame for a longer period. 3. Dispose of used batteries in accordance with local ordinance regulations.
18 Built-in Memory This frame offers a function to copy and delete files. The NAND FLASH can be formatted. A. Copy files from a memory card to EMS memory (NAND FLASH): Press the CARD SELECTION button. The following screen will appear.
Press the PLAY/PAUSE button to enter NAND FLASH. Use the arrow buttons to select FILE and press the PLAY/PAUSE button again. Press the STOP button, then DISPLAY. The following screen will appear.
Select TARGET. The following screen will be displayed. Return to the memory selection screen by pressing the CARD SELECTION button and select COMPACT FLASH. The following screen will be shown where you select FILE.
Select the file you want to copy and press the STOP button, followed by the DISPLAY button. The following screen will be displayed. Now, the copied file is stored in NAND FLASH. B. Delete files Enter the memory card or NAND FLASH and select the desired file using the arrow buttons. Press the STOP button, followed by the DISPLAY button. The following screen will appear.
Select DELETE. In the dialog box shown, select Yes to delete the file or No to cancel the action. C. Copy files from NAND FLASH to SD card This process is similar to copying files from a memory card to NAND FLASH. Change the names of target disk and source disk and use the steps described above. 19 Adjusting the Display Screen The screen is adjusted as follows: Press the MENU button at the side of the DigiFrame 1550.
If the display area is shifted, press the MENU button at the frame side. Use the arrow buttons to highlight IMAGE SETTING and press the MENU button again. Select H-POSITION or VPOSITION with the arrow button. Press MENU again to adjust horizontal and vertical position with the arrow buttons. Press the MENU button to confirm the changed setting. Warning Do not immerse in water or liquids. Be careful when handling this product for glass material or sharp corners. Do not drop the product.
