Owner manual

Keeping your shaver in top shape

Automated cleaning

Available at your dealer or Braun Service Centres is the

Clean&Charge. It automatically takes care of all cleaning

and lubrication needs of your shaver.

Manual cleaning

For easy cleaning after each shave, switch the shaver

off. Press the release buttons to lift the shaver foil

(do not remove the foil completely).

Switch on the shaver

for approx. 5-10 seconds so that the shaved stubbles can

fall out.

For a thorough cleaning (weekly), remove the shaving

foil and tap it out on a flat surface. Using the brush,

clean the cutter block and the inner area of the pivoting

head. About every four weeks, clean the cutter block

with Braun cleaning agents.

If your skin is very dry and you notice a reduced perform-

ance of the shaver, apply a drop of light machine oil onto

the shaver foil.

Replacing the shaving parts

The shaver foil and cutter block are precision parts that,

in time, are subject to wear. Replace your foil and cutter

block every 18 months and get a 25% better shave.*

(Shaver foil and cutter block: part no. 7000)

(* Overall evaluation from Braun users comparing their

shave with new parts and those used for 18 months.)

Accessories

available at your dealer or Braun Service Centres:

•

Shaver foil and cutter block

(part no. 7000)

•

Wall holder

Subject to change without notice.

This product conforms to the EMC-Require-

ments as laid down by the Council Directive

89/336/EEC and to the Low Voltage Regulation

(73/23 EEC).

oil

7000

Syncro

5495458_S 4-42 Seite 7 Donnerstag, 6. Juli 2000 2:50 14