Operation Manual

10
Our products are engineered to meet the
highest standards of quality, functionality
and design. We hope you thoroughly
enjoy your new Braun appliance.
Caution
Read all instructions carefully before
using this product.
• This appliance was constructed to
process normal household quantities.
• This appliance is not intended for use
by children or persons with reduced
physical or mental capabilities, unless
they are given supervision by a person
responsible for their safety. In general,
we recommend that you keep the
appliance out of reach of children.
• Before operating, check whether your
voltage corresponds to the voltage
printed on the top of the unit.
• Keep hands, hair, clothing, as well as
spatulas and other utensils away from
whisks and dough hooks during opera-
tion to prevent personal injury. Do not
contact moving parts during operation.
• Only with the models M 870, M 880 and
M 880 M:
The blades are very sharp!
To avoid injuries, please handle
blades with utmost care.
• Braun electric appliances meet appli-
cable safety standards. Repairs or the
replacement of the mains cord must
only be done by authorised service
personnel. Faulty, unqualified repair
work may cause considerable hazards
to the user.
Description
All models:
1
Motor part
2
Opening for the handblender attach-
ment
m
B
Cover for the opening
2
3
Opening marked with a hexagon
4
Opening marked with a circle
5 Ejection key for the dough hooks 9 / j
,
the whisks q/w and the chopper
attachment CA-M
6 Switch
7 Locking flap-up spout for winding up
the cord around the motor part (g)
8 Anti-skid base ring
9 Dough hook with hexagonal plate
j Dough hook with round plate
q Whisk with round plate
l Whisk with hexagonal plate
With the models M 820, M 830, M 870,
M 880 and M 880 M only:
m Handblender attachment
With the models M 830, M 880 and
M 880 M only:
n Mixing/measuring beaker (to be
used only with the handblender
attachment m)
With the models M 870, M 880 and
M 880 M only:
Chopper attachment CA-M o–r
o
Upper part
p Blade insert
q Chopper bowl with model identifi-
cation on the bowl (CA)
r Anti-skid double function base/lid
Notice: All models can be extended by
the handblender attachment m and the
chopper attachment CA-M o–r and
HC-M (without illustration), if these
attachments are not standard with your
model.
Specifications
Voltage/wattage:
see type plate on the motor part 1.
Automatic shut-off
If the appliance is overloaded, e.g. if the
motor is blocked, the motor part may be
automatically switched off.
If this is the case, light vibrations may be
observed. The inserts stop rotating or
rotate only very slowly. Turn the switch
off, so that the motor can cool off. After a
cooling off period of at least 10 minutes it
can be switched on again.
Switch 6
Switch position:
P = «pulse» (speed corresponds to
setting «3»)
0 = Off
1 = Low speed
2 = Medium speed
3 = High speed
Assembling/disassembling
Im
portant: Always set the switch to posi-
tion «0» and unplug the appliance before
Maximum operating time:
with the dough hooks 5 minutes
with the whisks 15 minutes
English
98907293_M800_S6-82 Seite 10 Montag, 20. April 2009 1:44 13