Pro
Pro Pro
Pro
01
02
1 2 3 03
04
Die Produktspezifikationen basieren auf den neuesten Informationen, die zum Zeitpunkt der Erstellung dieses Handbuchs vorlagen. Der Hersteller übernimmt keine Verantwortung bei unsachgemäßem Gebrauch. Es ist strengstens untersagt, die Kamera ohne Genehmigung zu demontieren, und der Hersteller übernimmt keine Verantwortung dafür.
BRAUN Scouting Cam BLACK1320 WiFi Solar 4K DS
Contents 1.Important tips....................................................................................01 2.Product presentation....................................................................... 02 3.Install battery & SD card .……........................................................ 03 4.Usage of Camera …………………….................................….……..04 5.Button feature introduction………........................................……....04 6.System Setting………………………...................................
1. Important tips 1.1 About Batteries ● 8pcs 1.5V AA alkaline batteries are required for the maximum battery life. Used and new batteries cannot be mixed, do not mix battery types. Note: Do not use rechargeable batteries. The low voltage affects the use time of the camera. ● When the camera isn’t used for a long time, please remove the batteries to avoid leak damage to the camera or battery power loss. 1.2 About SD card ● This camera must use a brand high-speed SD card of class 10.
● Clean the PIR lens if it is dirty during use. ● Cleaning steps: Try to blow it off or gently pick out the dirt. Don't try to wipe it, otherwise it may cause scratches. PIR lens scratches reduce PIR detection performance. ● Please remove the protective film on the PIR sensor, it will affect the monitor distance. ● Avoid error triggering, the machine cannot be placed near heat sources (especially where windy). 2.Product presentation 2.
2.3 Application scene ● For hunting and tracking of animal traces or habits. ● Used to observe the flowering process of plants. ● As an temperature-trigger security camera for homes, farms, offices, and communi- ties. ● Other indoor and outdoor monitoring where evidence of intrusion is required. 3.Install battery & Insert SD card 3.1 Install the batteries ● Open the camera rear housing, you will find the battery box (as Figure 1), 8pcs batteries must be installed.
̕ 4.Usage of Camera 4.1 OFF mode: the switch key in “OFF” position means Power OFF mode. 4.2 SETUP mode: the switch key in “SETUP” position means settings mode. 4.3 ON mode: the switch key in “ON” position means it will be in monitoring mode after count down. The camera will work according to parameters set in menu. 5.Button feature introduction 5 12 1.MENU button 1 7 3 2. REPLAY button 8.Right button 4 3.SHOT button 9.SD card slot 4.OK button 10.USB port 5.Up button 11.OFF/SETUP/ON 6.
6.System setting 6.1 Pull the switch to “SETUP” mode, the camera enters the setting mode, the LCD will be turned on. 6.2 On “SETUP” mode, press “MENU” button to enter the setting interface, then set system parameters according to the menu display on the screen, press UP/Down/LEFT / RIGHT button to move and change settings, and press “OK” button to confirm the change, then press “MENU” button to exit menu. Note: Press “OK” button to save the changes. Otherwise, you will lose the new settings. 6.
Name Setting Describe Mode Photo Video Photo + Video Choose the camera working mode. PIR Interval 5Seconds After the camera triggers shooting, the camera does not take photo and record again within the setting interval time, it can prevent the SD card from being filled fully with duplicate files. ↓ 59Minutes PIR Sensitivity Low Medium High The sensitivity of the PIR sensor depends on the environmental temperature.
IR LED OFF: the IR light won’t be turned on when the environment light is dark or all dark Note: Auto is recommended Side PIR Setup OFF ON OFF: The sensors on both sides will not be turned on. Time Lapse ON OFF When choosing “ON”, the camera automatically takes photos / video recording according as the set interval. Normally it is used to observe cold-blooded animals, such as snakes or flowering processes. Note: When choosing “ON”, the PIR sensors are not working.
Image Size day 60MP(10320*5808) 24MP(6528*3672) 56MP(9984*5616) 20MP(6144*3456) 52MP(9632*5408) 16MP(5376*3024) The options for photo resolution: the higher the resolution, the higher the quality and the bigger the file size of the recordings. 48MP(9248*5200) 13MP(4816*2704) 44MP(8832*4960) 8MP(3840*2160) 40MP(8416*4736) 5MP(3072*1728) 36MP(8000*4496) 3MP(2304*1296) 30MP(7392*4160) 2MP(1920*1088) at night 8MP(3840*2160) 3MP(2400*1344) 5MP(2960*1664) 2MP(1920*1088) Picture NO 1.Photo 2.Photo 3.
Video resolution day 4K/30 Fps (3840*2160) 2.7K/30Fps(2704*1520) 2K/30Fps(2560*1440) 1296 30Fps(2304*1296) 1080P/30Fps(1920*1080) 720P/30Fps(1280*720) 480/30Fps（848*480) 360/30Fps(640*368) The options for photo video resolution: the higher the resolution, The higher the quality and the bigger The file size of the recordings.
and set the current date & time. 2.Date Format: choose different date format. Time Format 12H and 24H Option for 12H or 24H Date Stamp OFF ON The default is “ON”, If choosing OFF, then all watermarks in the picture and video files will not be displayed. Camera Name Camera Name Press “UP/DOWN/LEFT/RIGHT” and choose the setting and press the buttons to set camera name. Password ON OFF 1.
WIFI Auto WIFI Of f 1minutes 2minutes 3minutes After turning on, the WIFI automatically exits if it doesn’t connect camera successfully within the set time. Beep sound ON OFF The default is “ON” If choosing “OFF”, the buttons have no sound during the operation. Language English, French, Spanish , Portuguese, German, Italian, Chinese, Russian， Japanese This hunting camera supports multiple languages. Format Cancel OK All files will be deleted after format.
7.3 When the APP is downloaded and installed, the mobile terminal will prompt “Allow Hunting 4K Pro to access photos and media on your device?” during the installation process. Please select “Allow” at this time. If not allowed, the APP cannot read camera pictures and videos(as picture) Android/IOS 8. Camera connect with smartphone by WIFI 8.1 Steps for Android Mobile phone to connect camera ● Please turn off your cellular data before using，as Figure 1，and turn on Bluetooth, as Figure 2.
● After the countdown, the mobile phone will switch to its WLAN interface automatically select the “Hunting 4K” name, and follow the prompts to enter the password: 12345678 to connect to the camera WiFi as Figure 8. ● After the WiFi connection is successful, the camera displays as Figure 9. ● Click back to enter the APP and select “Keep WLAN connection” as Figure 10. ● Then enter real time monitor screen as Figure 11 to take photo and video, playback and set parameters etc.
Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 14
Figure 10 Figure 11 8.2 Steps for IOS system app connect camera ● Please confirm that the smartphone Bluetooth is on before operation, as Figure 1. ● Click the app icon, as Figure 2 “Hunting 4K Pro”, the “Turn on Camera Bluetooth” interface pops up, as Figure 3. ● Click “TURN ON BLUETOOTH”, it will pop up the interface as Figure 4. ● Select the corresponding Bluetooth name of the camera “CAMERA-XXXXXXXX”, and click “TURN ON BLUETOOTH” as Figure 4.
● Select “Hunting 4K” name and follow the prompts to enter the password 12345678 to connect to the camera WiFi, as Figure 7. ● After the WiFi connection is successful, the camera displays as Figure 8. Click “Hunting 4K Pro”， then enter real time monitor screen as Figure 9 to take photo and video, playback and set parameters etc.
Figure 4 Figure 7 Figure 5 Figure 8 17 Figure 6 Figure 9
9.Installation and positioning 9.1 Calibrate the camera installing position ● To verify that the camera effectively monitors the selected area, pull the switch to “SETUP” and fix the camera. ● Within the monitoring area you want, try different distances and angles to move repeatedly around the camera, the LED indicator flash to prove within the monitoring range. The LED light does not flash to prove outside the monitoring range.
10.Specification parameters Product name BRAUN Scouting Cam Black1320 WiFi Solar 4K DS LCD SCREEN 2.4” Camera Day: 13MP / Night: 2MP Lens FOV=100 Photo resolution Day: 60MP, 56MP, 52MP, 48MP, 44MP, 40MP, 36MP, 30MP, 24MP, 20MP, 16MP, 12MP, 8MP, 5MP, 3MP, 1MP / Night: 8MP,5MP,3MP,1MP video resolution Day: 4K, 2.
Battery 8X1.5AA battery MIC Built-in Microphone Speaker Built-in speaker Working temperature -20°C to +60°C Storage temperature -30°C to +65°C Camera weight About 482g Size 160x97x74MM 11.FAQ FAQ Problem analysis Solutions Camera can’t take photo properly 1. PIR protective film isn’t removed. 2. Whether the installation is in a valid range or not. 1. Please check if remove the PIR protective film or not. 2. Please check the installation position.
No pictures inside the SD/TF card 1.1.Bad SD/TF card. 2.Whether the card is locked or not format the SD/TF . Change and format the SD/TF card, and check if the card can take photo and record properly. No photos or video at night The battery voltage is too low Replace with the new battery The app could not connect 1.The app is not compatible with Mobile phone. 2.The phone does not open Bluetooth. 3.The WiFi does not connection properly. 1.Check the app version or updated mobile system. 2.
Solar Panel
Introduction 1.Solar panels 2.DC IN( MINI-USB) 3. LED indicator 4. Contact shrapnel 5.Lock switch Function Description 1. MINI-USB: it can charge the battery with an adapter (DC5V/2A) 2.
3. LED indicator : Red indicator: When the MINI-USB 5V is charging the internal battery, the red indicator will be on and the fully charged light will be off. Blue indicator : When the sun light shines on the solar panel, the solar panel converts the light energy into electrical energy to charge the battery, the blue light is on, and the fully charged light is off. Installation and Attention 1. When installing solar panels, do not allow other obstacles to block the light, preferably in an open place. 2.
3.Installation method : Align the solar panel with the camera slot and install it Push the solar panel forward and fasten it. 1 2 3 4.
Parameter Product Solar Power Bank DC-IN MINI-USB-DC 5V (to charge the internal battery) DC OUT DC6.
FAQ: FAQ Camera coesnot turn on Problem analysis Problem analysis 1. Whether the solar panel is in good contact with the machine and whether it is installed in place. 2. The solar panel ran out of power. 1.The adapter is faulty. The solar panel cannot 2.The USB cable is not connected well. be charged 1. Please check whether the shrapnel on the solar panel and camera is black or dirty; Clean the dirt off the shrapnel. 2. Please check whether the solar panel and the camera are properly connected. 3.
4.The protective film on the 3. Put the solar panel in an open place where it is exposed to solar panel is not torn off. sunlight, and the blue indicator is on when charging normally. 4. Tear off the protective film on the solar panel, and the blue indicator lights up during normal charging. Disclaimer: The product specifications are developed on the latest information when prepared for this manual, it is subject to change without notice, whichever is the actual camera.
̕
5 12 3 1 7 8 2 4 9 6 10 11
8.
Pro
Pro
Pro
1. MINI-USB: puerto para cargar la batería interna con el adaptador (5 Vcc/2 A) 2.
3. Indicador LED: Indicador rojo: Cuando la batería interna se esté cargando desde el puerto MINI-USB de 5V, el indicador rojo estará iluminado y se apagará cuando la batería esté completamente cargada. Indicador azul: Cuando la luz del sol incida sobre el panel solar, este convierte la energía lumínica en energía eléctrica para cargar la batería, la luz azul se ilumina y se apagará cuando la batería esté completamente cargada. 1.
1 2 3 03
04
05
Las especificaciones del producto se desarrollaron en la información más reciente durante la preparación de este manual y está sujeto a cambios sin previo aviso, cualquiera que sea la cámara real. El fabricante no acepta ninguna responsabilidad por un uso inapropiado. Está estrictamente prohibido desmontar la cámara sin permiso, y el fabricante no asumirá ninguna responsabilidad por ello.
3.
̕
5 12 3 1 7 8 2 4 9 6 10 11
Pro
Pro
Pro
Pro
01
02
1 2 3 03
04
05
Le specifiche del prodotto sono basate sulle informazioni più recenti disponibili al momento della stesura del presente manuale e sono soggette a modifiche senza preavviso, a prescindere dalla fototrappola effettivamente utilizzata. Il produttore non si assume alcuna responsabilità per danni derivanti da un uso improprio. È severamente proibito smontare la fototrappola senza autorizzazione e il produttore non si assume alcuna responsabilità per danni derivanti da una tale azione.
̕
5 12 3 1 7 8 2 4 9 6 10 11
Pro
Pro Pro
Pro
01
02
1 2 3 03
04
05
Les spécifications du produit sont développées sur la base des dernières informations connues au moment de la préparation de ce manuel ; elles peuvent être modifiées sans préavis, quelle que soit la caméra réelle. Le fabricant ne saurait être tenu responsable en cas d’utilisation inappropriée. Il est strictement interdit de démonter la caméra sans autorisation, et le fabricant ne peut être tenu pour responsable en cas de démontage.
