Instruction Manual

NFC-enabled device directly over the NFC logo on the

BRAVEN BRV-X speaker. Hold it in place until you see a

prompt on your device asking you if you want to pair to

the BRAVEN BRV-X speaker. You may need to adjust the

positioning of the device on the NFC logo to ensure the

device’s internal NFC transmitter aligns with the BRAVEN

BRV-X speaker’s internal NFC receiver.

NOTE: If your BRAVEN does not have an active

Bluetooth® connection and is left on, it will shut itself

off after 30 minutes to preserve the battery. To restart

your BRAVEN you will need to press and hold the power

button for 2-3 seconds.

PAIRING TWO TOGETHER –

WIRELESS STEREO-PAIRING

Want even bigger sound? If you have two BRAVEN BRV-X units

(yeah, you should probably get two), you can pair them together

for left and right stereo using “True Wireless” technology. Here’s

how you do it:

First be sure to disconnect all Bluetooth® connections (if any) on

your device and remove any previously paired BRAVEN BRV-X

speakers from your device.

Next, press and hold the battery check button on both BRAVEN

speakers for 5 seconds until you hear a sonar sound from both

speakers. Within 30 seconds, a second beep will indicate a True

Wireless connection between the BRAVEN BRV-X speakers.