User's Manual
To reduce the risk of fire or electric shock, do not expose the Tumi
Wireless Active Noise Cancelling Headphones to rain or moisture
while charging. The Tumi Wireless Active Noise Cancelling
Headphones should not be exposed to dripping or splashing, and
objects filled with liquids, such as vases, should not be placed
on or near it while being charged or charging other devices. As
with any electronic products, use care not to spill liquids into
any part of the product. Liquids can cause a failure and/or a fire
hazard. The power supply must be used indoors only. Make
no modifications to the product or accessories. Unauthorized
alterations may compromise safety, regulatory compliance, and
system performance, and will void the warranty. Do not place
any flame sources, such as lighted candles, on or near the Tumi
Wireless Active Noise Cancelling Headphones. The Tumi Wireless
Active Noise Cancelling Headphones contains small parts that
may be a choking hazard and is not suitable for children under
age 3. Do not continue charging the battery if it does not reach
full charge within the specified charging time. Overcharging may
cause the battery to become hot, rupture, or ignite. If you see
any heat deformation or leakage, properly dispose of the battery.
Do not attempt to charge the battery in temperatures outside
the range of 32°-104°F (0°-40°C). If the battery begins to leak, do
not allow the liquid to come in contact with your skin or eyes. If
contact has been made, wash the aected area with plenty of
water and seek medical attention immediately. Do not expose the
product or battery to excessive heat, including direct sunlight or
fire and storage or use inside cars in hot weather, where it can be
exposed to temperatures in excess of 115°F (60°C). Doing so may
cause the battery and power supply to generate heat, rupture,
or ignite. Using the product in this manner also may result in a
loss of performance and a shortened life expectancy. Extended
exposure to direct sunlight may damage the external appearance
and material qualities. Do not step on, throw, or drop batteries or
the power supply or device, or expose them to a strong shock. Do
not pierce, crush, dent, or deform the batteries or power supply in
any way. If either becomes deformed, properly dispose of it. Do not
short-circuit batteries. Do not attempt to service the Tumi Wireless
Active Noise Cancelling Headphones yourself. Opening or
removing covers may expose you to dangerous voltages or other
hazards and will void the manufacturer’s warranty. To prevent risk
of fire or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles. Your Bluetooth device
(mobile phone, music player, tablet, laptop, etc.) must support the
A2DP Bluetooth profile in order to work wirelessly with your new
Tumi Wireless Active Noise Cancelling Headphones. The A2DP
profile is supported by most recent mobile products with built-in
Bluetooth capability. Please refer to your device’s user manual for
details and instruction regarding the Bluetooth profiles it supports.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
WARNINGS, CAUTIONS & LEGAL INFORMATION