Product Manual

Assembly Instructions

Intake Hose Assembly

1.) On one end of the hose, slide on the floating collar (#12387) and attach the nozzle (12386) using

the bridge clamp (#12406). Securely fasten the clamp.

2.) On the other end of the hose, slide the support collar over the hose and attached the safety

flange (#12389) to the hose using the bridge clamp (#12406)

Exhaust Chute Assembly

3.) Attach exhaust chute (#12398) to the top of the loader housing and secure with 8 bolts, washer

and nuts.

4.) Install the discharge flap (#12399) and secure with the supplied hardware.

Safety Flange Assembly

5.) Attach safety flange (#12389) to the front of the truck loader vac housing using the two phenolic

securing knobs.

6.) Carefully stretch the hose and secure the support collar (#12388) at a point where the chain

dangles to the hose.

Hose Support Boom Assembly

7.) Assemble hose support boom/hanger arm (#12403) and attach support chain (#12411) to hose

support boom

Truck Loader Vac Mounting

8.) This unit MUST be securely fastened to a trailer, or truck bed so the exhaust discharges into an

enclosed container. This truck loader vac MUST be securely mounted prior to and during all

operation and assembly. The unit is not intended to be operated free standing and will create an

unsafe situation if attempted. The loader must be secured using 3/8” bolts with washers and

lock nuts.