Product Manual

Operation Instructions

Pre-start Check List & Procedures

CAUTION:

Add engine crankcase oil. A new engine is shipped without oil. You must add the correct

amount of oil to engine crankcase or engine will be damaged beyond repair.

Before starting the engine, you will want to make sure you have completed the following:

1. Checking Controls

2. Checking/Adding Oil

3. Filling Truck Loader Vac Gasoline Tank

4. Inspecting Fuel System for Leaks

5. Wearing Personal Protection

6. Ensuring unit is securely mounted

7. Clearing Area of People and Objects

8. Working During Daylight

Each of these procedures is discussed in detail below.

Check controls.

Check that:

• All guards are in place and tight

• Inspect hose mounting flange to blower housing safety switch,

insure it is operational

• Throttle lever operates freely

• Inspect suction hose for damage

•

Hose hanger moves freely

Check/add oil

Check the oil level using the dipstick and add oil as needed daily.

Using a funnel, add oil up to the FULL mark on the dipstick with the

recommended oil type for your engine and expected ambient conditions.

(See engine Owner’s Manual for oil type and capacity, and more detailed

oil check/fill instructions.)

WARNING: Burn hazard

Never open oil fill port while engine is running. Hot oil can spray

over face and body.