Product Manual

Operation Instructions
15
3) Wear long pants to protect legs from sparks, hot engine and flying
debris.
4) Never wear jewelry or loose-fitting clothing when starting or
operating the truck loader vac or any mechanical device. Loose or
dangling apparel, jewelry or hair can become entangled in moving
parts.
Ensuring unit is
securely mounted
Never operate unit free standing. Unit needs to be mounted securely to
truck or trailer before use.
Clearing Area of
People and Objects
Never direct discharge material toward anyone. Avoid discharging material
towards a wall, car, house or other objects. Material may ricochet back at
operator.
Work During
Daylight Hours
Only use the machine in daylight or in well-lit conditions. Never operate
the truck loader vac after dark.
Starting the Truck Loader Vac
After you have completed the pre-start checklist and procedures, you are ready to start the truck
loader vac.
The following directions detail how to start the engine of your truck loader vac.
WARNING:
Never attempt to use the truck loader vac without proper protective
equipment, particularly eye protection and a full-face shield.
To start the truck loader vac:
Note: For additional engine starting instructions see your engine manual.
WARNING:
Never leave truck loader vac unattended.
1) Turn the On/Off Engine Switch to the ON position located on engine
2) For cold engine, Place the choke in the closed/on choke if engine is cold. If engine is hot,
do not use choke.
3) A) Pull Start: Rapidly pull “Start” cord (recoil starter) with right hand several times until
engine starts. Allow starter cord to return slowly.
B) Electric Start: Turn Key switch to the START position and hold until the engine starts.