Product Manual

Operation Instructions
17
6. If clog is present in discharge chute, carefully remove chute. Note this is heavy, please use
caution removing. Wear gloves, clear debris clogging chute.
7. Once clog is cleared, reassemble and reconnect the spark plug wire and battery cables if
applicable to resume operation.
CAUTION:
Caution should be used when clearing the clogged debris. Always wear gloves. Sharp
edges on the impeller or objects maybe be present.
Refueling
1) Before removing gas cap, turn engine off and allow to cool for at least two minutes.
Note: A running, or hot engine can ignite fuel.
2) Remove gasoline cap.
3) Add gasoline through the fill opening:
- Use only an UL-approved portable gasoline container to transfer the gasoline to the truck
loader vac’s tank.
- Be aware of safety warning and instructions below for avoiding static electric caused fires.
WARNING:
Static electric spark hazard
A static electric spark can explosively ignite gasoline vapor, resulting in a flash fire that
could cause serious injury or death. See “Special Safety Information on Static Electricity”
in this manual.
4) Clean up gasoline spills /splashes immediately.
If possible, move the truck loader vac away from spilled gasoline on the ground.
Wipe up spilled gasoline and wait 5 minutes for excess gasoline to evaporate before starting
engine.
Gasoline soaked rags are flammable and should be disposed of properly.
If gasoline is spilled on your skin or clothes, change clothes and wash skin immediately.
5) Replace gasoline cap securely before starting engine.
6) Store extra gasoline in a cool, dry place in an UL-approved, tightly sealed container.
7) Filling towable units or portable containers at service stations:
Even if you have a towable unit, avoid static electric sparking while filling the
gasoline tank:
Never fill the truck loader vac’s gas tank directly from the fuel pump. The truck
loader vac’s tank is not grounded and high velocity flow from the pump can
cause static electricity build-up. Use an approved portable container to