Product Manual

Maintenance and Storage
21
Maintenance
Perform regular
maintenance
Perform periodic maintenance as directed in this manual to keep the truck
loader vac in safe working condition.
Follow safety rules
Read and follow these safety rules whenever you will be servicing the
truck loader vac:
• Turn off truck loader vac. Always turn off truck loader vac and remove spark
plug or spark plug wire and disconnect battery on electric start models before
working on the engine or truck loader vac to prevent accidental starting.
• Replace guards/shields. Make sure all guards and shields are replaced after
servicing the truck loader vac.
• Burns. Muffler will be hot even after unit is stopped. Allow unit to cool before
servicing.
• Repair. Major service, including the installation or replacement of parts,
should be performed only by a qualified service technician. Obtain factory
approved parts from Brave Service at 1-800-350-8739.
• Replacement parts. If a part needs replacement, only use factory approved
repair parts. Replacement parts that do not meet specifications may result in
a safety hazard or poor operation of the truck loader vac and will void the
warranty.
Perform engine
maintenance
Perform engine maintenance as specified in the engine owner’s manual.
Engine maintenance items include:
1. Change Oil and oil filter (if applicable)
2. Air filter check/replacement
3. Spark plug cleaning and replacement
4. Fuel tank cleaning.
Inspect fuel system
/ check for leaks
Inspect the fuel system and check for leaks on a regular basis.
Look for signs of leaks, damaged fuel tank, cracked hose or a defective fuel
shut-off valve. Do not start truck loader vac until needed repairs have been
completed.
Maintenance Mode
Before performing any maintenance on the truck loader vac, it must be placed in maintenance mode.
1.) Turn off engine.
2.) Shut off fuel valve.
3.) Unplug spark plug wire from spark plug, (see engine owners’ manual).