User Manual

ManualsBrandsBravetti ManualsFood processorsQUAD BLADE FOOD PROCESSOR EP114H

Congratulations! As the owner of a new Bravetti Food Processor, you are about to

use a very versatile and powerful kitchen appliance that will quickly become an

indispensable item in your kitchen. Bravetti products are engineered to meet the

highest quality standards and are designed to offer the ultimate in ease of operation

and convenience.

IMPORTANT INFORMATION

Please read all the following instructions carefully.

IMPORTANT

For your protection, the Bravetti Food Processor has a been fitted with a safety

interlock switch. The unit cannot run unless the food processor lid is locked in place.

Never attempt to defeat the food processor lid interlock.

Re-settable Thermal Safety

Device

Your Food Processor has been

designed with a unique safety system

which prevents damage to the unit’s

motor and drive system, should you

inadvertently overload your appliance.

The safety system will automatically cut

the electric power to the appliance

when the device senses an overload or

excessive temperature in the motor or

drive system. Should this occur during

use and the appliance stops

functioning, follow the re-setting

procedure below:

1. Turn the “ON/OFF” speed control

to the “OFF” position

2. Unplug the unit from the wall

receptacle.

3. Remove and empty the processor

bowl. Ensure that no food is

jamming the cutting blades or

attachments.

4. Allow the appliance to cool down

for a minimum of 30 minutes.

5. Re-install the processor bowl and

re-plug appliance in the wall outlet.

6. Proceed to use the appliance as

before. Should the appliance still

fail to operate, turn the “ON/OFF”

speed control to the “OFF” position

and unplug from the wall outlet.

Allow the appliance to cool down

for an additional 1 to 2 hours. After

this time has passed, repeat the

restart procedure, steps 5 and 6

above.

Using the Storage Compartment

Your Bravetti QUAD BLADE Food

Processor comes with a storage

compartment. (Fig. 20)

Fig.20

1. Lift the lid of the storage compartment.

2. Place attachments inside as shown

above.

Spatula Storage

Slide the spatula into the slot provided

on the side of the processor body.

(Fig. 21)

Cord Storage

The power supply cord can be

stored by feeding it into the opening

at the back of the food processor

body. (Fig. 22)

Fig. 21

Fig. 22

CLEANING & MAINTENANCE