Operation Manual

GB
version 1.0 ECopyright Bravilor Bonamat B.V.
VIII
Safety instructions and danger warnings
General
The manufacturer accepts no liability whatsoever for damage or injury resulting from a failure to
(strictly) observe the safety instructions contained in this document or resulting from negligence during
the installation, use or maintenance of the machine specified on the front cover of this document or of
any related accessories.
Additional safety instructions may be required, depending on the specific working conditions required
for the accessories used. Please contact your dealer if you think there may be any potential danger in
using the machine.
The full responsibility for observing the local safety instructions and regulations always rests
with the user of the machine.
Instructions for use
D Each person working with the machine should know the contents of this document and carefully
follow the instructions contained. The management must instruct the personnel on the basis of this
document and take all the instructions and recommendations into account.
D Never change the order in which activities must be carried out.
D Always keep this document near the machine.
Icons and instructions on the machine (if present)
D Icons, warnings and instructions attached to the machine form part of the safety provisions. They
must not be covered or removed and they must be present and remain legible throughout the life of
the machine. Any icon, warning or instruction that becomes illegible must be repaired or replaced
immediately.
Users
D The machine may only be used by properly trained and authorized persons. Temporary staff and
persons undergoing training may only use the machine under the supervision and responsibility of
authorized users.
Proper use
1
The machine is exclusively designed for delivering coffee and hot water. Any other or further use is
not in conformity with the purpose. The manufacturer does not accept any liability for damage or injury
resulting from this. The machine meets the current standards and guidelines. Use the machine only if it
is in perfect technical condition and only for the proper purpose as described above.
Technical specifications
The specifications given in this document may not be modified.
Modifications
Modification of (parts of) the machine is not allowed.
1. ”Proper use” as laid down in EN 292−1 is the use for which the technical product is suitable as stated by
the manufacturer − including any instructions in the sales brochure. In cases of doubt, it is the use that is
evident from the construction, version and function of the product. Proper use includes taking into account
the instructions included in the ”instructions for use”.