Operation Manual

GB
version 1.0 ECopyright Bravilor Bonamat B.V.
X
Safety devices present
The machine is default provided with the following safety devices:
− ON/OFF switch (P.)
With the ON/OFF switch the supply of the electrical current is switched on and off. The supply
voltage − also in the OFF position − is never switched off. In practice this switch functions as the
main switch for switching the machine on and off.
− SELECTION keys (G. − J.)
With the SELECTION keys the coffee−making process is started.
− STOP key (K.)
With the STOP key the coffee−making process is stopped.
When the machine is re−started after having been stopped, the coffee−making process begins again.
− Thermal protection against boiling dry
A temperature contact in both the coffee−making and the hot water system makes sure that the
power is interrupted as soon as the boiler temperature exceeds the boiling point by several tens of
degrees Celsius.
− Overflow protection (coffee−making system)
A water meter measures the quantity of water required by each coffee−making system. If the
electrically−operated water tap is opened while the water meter is not generating pulses or if this
water tap is closed while the water meter is generating pulses, the coffee−making system will be
switched off displaying the message:
ERR +
+ on the display, see § 8.4.
− Overflow safety device (hot water system)
As soon as the hot water system becomes overloaded, the water is discharged through the
overflow pipe. Therefore the hot water system is switched off, displaying the message:
ERR + + on the display, see § 8.4.
Machines and the environment
Packaging material
The main components of the packaging material for transport and protection of the machine are the
following:
− Corrugated board
− Polystyrene elements
Generally, the packaging material can be returned through your dealer after installation of the machine.
If this is not be possible, ask your local authority refuse department how you can dispose of the
materials.
Disposal of the machine
Machines that you wish to dispose of can usually after consultation be returned to your dealer.
If this is not possible, inquire with your local authority about the possibilities for re−use or
environmentally−friendly processing of the materials. All plastic parts have been clearly coded
for this purpose. The printed−circuit board in the machine and the components connected to
this should be consigned to electrical or electronic refuse.