Operation Manual

GB
version ECopyright Bravilor Bonamat B.V.2 1.0
1.1.3 Use of the keys
In the users’ menu the keys (G.−J.) are used as
selection keys for selecting the required amount
of coffee.
In the programming menu these keys are used
for selecting a certain setting option. Key (K.) is
the stop key. With this a selected function can be
stopped and/or interrupted. In the programming
menu the stop key is also used for returning to a
higher menu. When the symbol
appears in
the display, the stop key may be used. In the
users’ menu the key (L.) is used to activate the
hot water system. Above this key a singing
teakettle appears in the display . In the
programming menu and with the preset time
settings (timer) key (L.) functions as the
confirmation key. The enter key  appears in the
display (O.) when a confirmation is required.
The keys (M.) and (N.) are selection keys
used for decreasing or increasing the value to be
set. In the programming menu these keys are
used to browse through the various settings
(programming turret).
The symbol in the users’ menu indicates
that preset time settings can be selected. For this
press both selection keys (M.) and (N.).
When the symbol appears in the menu,
the setting can be reset by pressing both
selection keys (M.) and (N.).
1.2 Brief description of
operation
The machine is connected with the mains lead
and the separately enclosed water connecting
hose (fig.2 ) to the electricity and water supply
systems respectively. The electrically operated
tap controls the water supply to the
coffee−making system and the hot water system.
With the on/off switch (P.) the machine is
switched on.
TIP
− The operations described in these
instructions for use are illustrated with the
help of the B10HW with the standard factory
settings.
Fig. 2 Water connecting hose
G
H
I
J
KLM
N
OI
Fig. 3 Operating panel coffee−making and hot
water system