Operation Manual

GB
version ECopyright Bravilor Bonamat B.V.10 1.0
− A signal sounds for confirmation.
− As soon as the coffee container has been
filled, the filter pan flashes on the display for
the dripping−on time (fig.9 ).
D After the dripping−on time a signal sounds (3
short beeps) indicating that the filter pan can
be removed.
D Place the cover on the container.
D The coffee can now be tapped.
G
H
I
J
KL
M
N
Fig. 9 Dripping−on time
TIP
− During the coffee−making process the filter
unit of the other coffee container can directly
be made ready for a next coffee−making cycle.
D Wait until the coffee−making cycle for the
first container has been finished.
D When the dripping−on time starts, the
spray head can be placed in the right
position above the other filter unit.
D Repeat the above procedure for making
coffee.
− The coffee−making process can at all times
be stopped by pressing the STOP key (K.).
After this the coffee can be tapped or an
amount can be selected again. In the second
case keep in mind that there is already coffee
in the container.
4.1.2 Tapping the coffee
D Place a cup or jug under the coffee tap (AB.)
and pull the handle forward.
TIP
− The tap can be locked in the open position by
pushing it fully backwards against the spring
pressure.
4.1.3 Pre−programmed
settings
D Making coffee at pre−programmed times is
possible (§ 7.1.1 and § 7.3.8).
4.1.4 Coffee calculator
By simultaneously pressing the stop key (K.) and
one of the pre−selection keys (G.−J.) it can be
read how many grams of ground coffee must be
used for the selected number of litres of coffee
(or other programmed unit). Also when for once
another number of litres is set, the programme
calculates the required amount of ground coffee.