Operation Manual
GB
version ECopyright Bravilor Bonamat B.V.28 1.0
7.3.2 Selected units: litres,
cups, jugs or US gallon
The machine is default set to the unit L (= litres).
This unit can be changed. (This unit is default on
the display with the preference keys (fig.33 )).
− A selection can be made from the following
units: Litre = L, Gallon = GL (3.7853 L), Jug,
or Cup (fig.31 ).
− The selected is also used for further settings,
except with the total counters.
G
H
I
J
KLM
N
Fig. 31 Units to be selected
D Press programming key (I.).
− The L of litres starts flashing on the display.
− This is the default setting (fig.32 ).
D Press the selection key (M.) or (N.) until the
symbol for the desired unit flashes on the
display: cup, jug, GL (= US Gallon) or
L (= litre).
− The enter symbol appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
− The symbol for the desired unit stops
flashing and the other symbols disappear.
G
H
I
J
KLM
N
Fig. 32 The default set unit = L (litres)
D Selected unit:
litre , go to § 7.3.2.1
tap, go to § 7.3.3
jug, go to § 7.3.4
US gallon, go to § 7.3.5.
7.3.2.1 Changing pre−programmed
selection keys G−J (Litres)
G
H
I
J
KLM
N
Fig. 33 Default pre−selection keys
D Press selection key (N.), until fig.33 appears
on the display.
− The default pre−selectionof keys (G.−J.) can
now be adjusted.
D Press the pre−selectionkey to be changed (G.,
H., I. or J.).
D Press selection key (M.) or (N.) to select the
desired amount (table 5 ).
− The enter symbol appears on the display.
− Repeat these two previous steps to change
other pre−selectionkeys if necessary.
D Press the confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.) to go to the next
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
Model Factory setting
pre−programmed
selection keys
Setting range
B5HW 1−3−4−5 litres 1−5 litres
B10HW 2,5−5−7,5−10 litres 2−10 litres
B20HW 5−10−15−20 litres 4−20 litres
Table 5 Default settings