Operation Manual
GB
version 1.0ECopyright Bravilor Bonamat B.V.
29
7.3.3 Cup contents
The contents of a cup can be set, as not all cups
are of the same size.
− The setting range is between 50 and 200ml
and can be adjusted by steps of 5ml.
− The default setting for a cup is 125ml.
G
H
I
J
KL
M
N
Fig. 34 Cup contents
D Press selection key (N.) until fig.34 appears
on the display.
D Press programming key (J.).
− The position beside the programming key
starts flashing.
D Press selection key (M.) or (N.) to select the
desired amount.
− The enter symbol appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
7.3.3.1 Adjusting pre−programmed
selection keys G−J (Cups)
The machine calculates itself the number of cups
of the default pre−selectionkeys, in relation to the
preferred settings of litres divided by the content
of the cup. These default pre−selectionkeys can
be adjusted as desired.
G
H
I
J
KL
M
N
Fig. 35 Adjusting pre−programmed selection keys
for cups
D Press selection key (N.) until fig.35 appears
on the display.
− The default pre−selectionof keys (G.−J.) can
now be adjusted.
D Press the pre−selectionkey to be changed (G.,
H., I. or J.).
D Press selection key (M.) or (N.) to select the
desired amount (table 6 ).
− The enter symbol appears on the display.
− Repeat these two previous steps to change
other pre−selectionkeys if necessary.
− When cup contents other than 125ml have
been selected, the values of the
pre−selectionkeys will also differ from the
values given in table 6 .
D Press confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.) to go to the next
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
Model Factory setting
pre−programmed
selection keys
Setting range cup)
B5HW 8, 24, 32, 40 cups 8−40 cups
B10HW 20, 40, 60, 80 cups 20−80 cups
B20HW 40, 80, 120, 160 cups 40−160 cups
Table 6 Default pre−selection keys for cups