Operation Manual

GB
version ECopyright Bravilor Bonamat B.V.30 1.0
7.3.4 Jug contents
The contents of a jug can be set, as not all jugs
have the same size.
− The setting rage is between 50 and 3000ml
and can be adjusted by steps of 10ml .
− The default setting for a jug is 250ml.
G
H
I
J
KLM
N
Fig. 36 Jug contents
D Press selection key (N.) until fig.36 appears
on the display.
D Press programming key (J.).
− The position beside the programming key
starts flashing.
D Press selection key (M.) or (N.) to select the
desired amount.
− The enter symbol  appears on the display.
D Press confirmation key (L.) to confirm the
adjustment.
7.3.4.1 Adjusting pre−programmed
keys G−J (Jugs)
The machine itself calculates the number of jugs
for the default pre−selectionkeys, in relation to the
preferred setting of litres divided by the contents of
the jug. These default pre−selectionkeys can be
adjusted as desired.
G
H
I
J
KL
M
N
Fig. 37 Adjusting pre−programmed selection keys
for jugs
D Press selection key (N.) until fig.37 appears
on the display.
− The default pre−selectionof keys (G.−J.) can
now be adjusted.
D Press the pre−selectionkey to be changed (G.,
H., I. or J.).
D Press selection key (M.) or (N.) to select the
desired amount (table 7 ).
− The enter symbol  appears on the display.
− Repeat these two previous steps to change
the other pre−selectionkeys if necessary.
− When jug contents other than 250ml have
been selected, the values of the
pre−selectionkeys will also differ from the
values given in table 7 .
D Press confirmation key (L.) to confirm the
adjustment.
D Press selection key (N.) to go to the next
setting (§ 7.3.6.1) or press stop key (K.) to exit
the programming menu.
Model Factory setting
pre−programmed
selection keys
Setting range
(250ml/jug)
B5HW 4−12−16−20 jugs 4−20 jugs
B10HW 10−20−30−40 jugs 10−40 jugs
B20HW 20−40−60−80 jugs 20−80 jugs
Table 7 Default pre−selection keys jugs