Operation Manual
GB
version 1.0ECopyright Bravilor Bonamat B.V.
39
7.3.14 Setting descaling signal
hot water system
TIP
− The descaling signal for the hot water system
is for all types set to 1000 litres, see the posi-
tion beside the selection key (G.), fig. 51 .
− The setting range can be set as desired
between 100 and 9900 litres in steps of 100
litres.
− The position beside the selection key (J.)
gives the number of litres already made. In
this way it can be checked whether the
system soon needs descaling.
− When the set value is reached, the hammer
symbol and the thermometer will flash on the
display indicating that the machine needs
descaling.
G
H
I
J
KLM
N
Fig. 51 Descaling signal hot water system
The descaling signal can be set as follows:
D Press selection key (M.) until fig.51 appears
on the display.
D Press programming key (G.).
− The value beside the selection key starts
flashing.
D Press selection key (M.) or (N.) to select the
desired number of litres after which descaling
is required.
− The enter symbol appears on the display.
D Press confirmation key (L.).
− The desired amount has now been set.
D Press selection key (N.) to go to the next
setting or press stop key (K.) to exit the
programming menu.
7.3.15 Setting descaling signal
coffee−making system
TIP
− The descaling signal for the coffee brewing
system is for all types set to 1000 litres, see
the position beside the selection key (G.).
− The setting range can be set as desired
between 100 and 9900 litres in steps of 100
litres.
− The position beside the selection key (J.)
gives the number of litres already made. In
this way it can be checked whether the
system soon needs descaling.
− When the set value is reached, the hammer
symbol and the measuring spoon will flash on
the display indicating that the machine needs
descaling.
G
H
I
J
KLM
N
Fig. 52 Descaling signal coffee−making system
The descaling signal can be set as follows:
D Press (M.) until fig.52 appears on the display.
D Press programming key (G.).
− The value beside the programming key
starts flashing.
D Press selection key (M.) or (N.) to select the
desired number of litres after which descaling
is required.
− The enter symbol appears on the display.
D Press the confirmation key (L.).
− The desired amount has now been set.
D Press selection key (N.) to go to the next
setting or press stop key (K.) to exit the
programming menu.