Operation Manual

GB
version 1.0ECopyright Bravilor Bonamat B.V.
41
8. CORRECTING MALFUNCTIONS
In case of malfunctions first consult the
malfunctions tables. If the problem cannot be
solved, consult your Bravilor Bonamat dealer,
your service mechanic or one of the service
desks.
WARNING
n Check first to determine if the malfunction has
a mechanical or electrical origin. Work and
repairs on the electrical system may only be
carried out by a trained and authorized
service technician.
8.1 Malfunctioning analysis general
LIST OF MALFUNCTIONS
Symptom: Possible cause: Actions:
1. Nothing appears on the
di l
The switch (P.) is off. Switch ON/OFF switch (P.) ON.
display.
The supply voltage has been
interrupted.
Connect the supply voltage.
2. At switching on the machine
with the main switch, the
temperature setting flashes
with the figures 00.
The machine will first start
calibrating to ensure an
optimum setting.
Wait until the machine is ready
("25 minutes).
3. The water temperature is
not right.
The temperature has been set
too high or too low.
Adjust the water temperature,
see § 7.3.6.1.
4. Time is not set correctly. Set the correct time and day,
see § 7.3.7.2.
5. The machine does not work
according to the timer.
All B(HW)−machines are
standard provided with a
timer, see § 7.3.8. This must,
however, be activated.
Activate the timer, see § 7.3.8.