Operation Manual

GB
version ECopyright Bravilor Bonamat B.V.44 1.0
8.4 Display messages and their meanings
During normal use (e.g. in the case of
malfunctions or errors) or during the setting
procedure messages can appear on the display.
The table below gives an overview of these
messages, as well as the possible causes and
the actions to be taken (by the system or the
user) to return the system to normal functioning.
DISPLAY MESSAGES
Possible cause: Actions:
E1
“ERR + +
+ beep”
The overflow safety device of the
coffee−making system has been
activated.
Switch the ON/OFF switch (P.) off and
on again.
E1
“ERR + +
+ beep”
The overflow safety device of the hot
water system has been activated.
Switch the ON/OFF switch (P.) off and
on again.
p
Call in service.
E2
“ERR +
Temperature sensor is loose or
df ti
Switch off the HW activating key (L.).
ERR +
+ beep”
defective.
Call in service.
E3
“ERR +
The water supply is open, but no water
t
Open the tap.
ERR +
+ beep”
comes out.
Call in service.
E3
“ERR + +
uninterrupted
beep”
The overflow safety device of the
coffee−making system has been
activated.
Switch the ON/OFF switch (P.) off.