Operation Manual

GB
version 1.0ECopyright Bravilor Bonamat B.V.
19
D Press the confirmation key (L.) to confirm that
the container is empty.
− A signal sounds, the hammer symbol flashes
and a funnel appears on the display (fig. 16 ).
G
H
I
J
KLM
N
Fig. 16 Coffee−making system asks for descaling
solution
D Remove the plug of the filling hole for descaler
solution (B.).
− The filling hole of the coffee−making system
is found behind the spray head (C.).
D Place the special funnel in the filling hole and
carefully pour the descaler solution into the
filling hole.
D After pouring in the descaler solution, press the
confirmation key (L.).
− The resevoir is boiled empty to let the
descaler solution run through the flow
element.
− The first level block appears on the display
and the hammer symbol flashes (fig. 17 ).
− The coffee container is filled with water.
− When the signal sounds and the level blocks
on the display flash, the containers must be
emptied.
G
H
I
J
KLM
N
Fig. 17 First level descaling programme
coffee−making system
D Empty the container through the coffee tap.
D Press the confirmation key (L.) to confirm that
the container is empty.
− A sandglass appears on the display for a
waiting time of 5 minutes to let the renegite
do its job.
− Also the second level block appears on the
display and the hammer symbol flashes.
D After the waiting time the coffee container is
filled.
− When the signal sounds and the level blocks
on the display flash, the containers must be
emptied.
D Empty the container through the coffee tap.
D After this, press the confirmation key (L.) to
confirm that the container is empty.
− The third level block appears on the display
and the hammer symbol flashes.
− The coffee container is filled again.
− When the signal sounds and the level blocks
on the display flash, the containers must be
emptied.
D Empty the container through the coffee tap.
D After this, press the confirmation key (L.) to
confirm that the container is empty.
− The fourth level block appears on the display.
− The coffee container is filled for the last time.
− When the signal sounds and the blocks on
the display flash, the container must be
emptied for the last time.
D After this, press the confirmation key (L.) to
confirm that the container is empty.
− The counter appears on the display and is
automatically set to zero.
− Subsequently, the programme returns to the
users’ menu (§ 7.1).